Contact Platform Support
Help CenterRotary Blower Air Compressor
Related Products
-
Mature Gas Air Compressors BlowerUS$ 800 - 30,000MOQ: 5 Sets -
Natural Gas Compressor Roots Type Air BlowersUS$ 1,200 - 26,000MOQ: 2 Sets
-
Gas Blowers Biogas CompressorUS$ 1,000 - 21,500MOQ: 2 Sets
-
Oasis Roots Natural Gas CompressorUS$ 700 - 30,000MOQ: 3 Sets
-
Natural Gas CompressorUS$ 900 - 25,000MOQ: 5 Sets
rotary blower air compressor
Specifications
1low price roots blower
2.high efficiency
3.energy saving blower
4.make the output air,water clean without oil-dust and ordor
Advantage of the Three lobes roots blowers: low noise,bore of inlet and exhaust using corkscrew-shape tubes, make the inlet and exhaust process keep the direction of the helix to be sequential cut in.avoiding the noise and vibration that the moment of old blowers maximum reduce the big noise when blowers work.another advantage: three lobes roots blowers had higher compression and heat insulation efficiency.That advantage make the blower to be more energy saving than old blower.in relation to blower rotor. It use the shape of compound curve,make the occlusion more reasonable and enhancer compression efficiency. The stable performance depend on the rotor ,enclosure, siding and bearing ect key parts that all adopt progressive CNC machining equipment make the parts can exchange others
1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the Impedance complex muffler, the noise of our blowers are further reduced.
2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency.
3. Stable performance. The blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-control processing equipment thus make the interchangeability of parts and components increased.
4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condition, we still adopted the high precision balancing equipment and grinding machine to make it more balance. Therefore, the blowers are almost no vibration.
5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise.
6. Our blower bearing is introduced from Japan. There are two lubrication styles: Fat grease (below 0.6kgf/cm2), oil splash grease (0.7-0.9kgf/cm2), which makes the product quality more liable.
7. The transported air is clean and without any oil-dust, as the blower sealing structure is reasonable, oil can not enter the chassis, thus the air is very clean.
8. Low price: As we have our own produce line so the price of our blower is very competitive.
9. Advanced technology and accessory, we introduced advanced blower manufacture technology from Japan and many of our accessories are imported, such as NSK Bearing, imported Gear, and Gates triangle belt and so on.
10. Long life. The blower bearing what we used are all double-row and Self-aligning bearing.
11. The blower rotor is precision machined in its full surface, and since it is balanced precisely, it is almost without any vibration.
12. Case Material: HT200, Impeller Material: QT500-7.
13. Widely used in many fields, especially in gas transportation, waste water treatment, aquaculture, pneumatic transport, vacuum packing, oxygen generation, etc.
14.Oil tank: after milling they are all polished by digital grinding machine, in order to prevent the grear from broken because of oil leakage.
15. Bearing:Our bearing are doulbe-line bearing, can adjust the concentricity, and they are all strong fighting force, low vibration, moreover, and highly increase the life of the blowers.
16.Mercury column detecor: we test the air capacity and pressure through it, and makes the result very precise, and avoid the artificial error.
Major specifications:
Model: LZSR50-350
Air capacity: 0.44-180m3/min
Outlet Diameter: 50-350mm
Pressure: 9.8-98kpa
Discharge Pressure:0.1-1.0kgf/cm2
Motor Power: 0.55-315kw
Standard Accessories
Suction Silencer (With Air Filter)
Discharge silencer
Anchor Bolt
Reverse Valve
Flexible Joint
Safety Valve
Pressure Gauge
Common Base
Blower Pulley
Motor Pulley
V-belt Cover
V-belt
Lubricating oil
Advantage of the Three lobes roots blowers: low noise,bore of inlet and exhaust using corkscrew-shape tubes, make the inlet and exhaust process keep the direction of the helix to be sequential cut in.avoiding the noise and vibration that the moment of old blowers maximum reduce the big noise when blowers work.another advantage: three lobes roots blowers had higher compression and heat insulation efficiency.That advantage make the blower to be more energy saving than old blower.in relation to blower rotor. It use the shape of compound curve,make the occlusion more reasonable and enhancer compression efficiency. The stable performance depend on the rotor ,enclosure, siding and bearing ect key parts that all adopt progressive CNC machining equipment make the parts can exchange others.
Youlanda
Sales Manager
Company:Zhangqiu Oasis Machinery CO.,LTD.
ADD.:Industrial Zone, Xianggong Town, Zhangqiu City, Shandong Province, China
Zip Code:250203
Trade Manager ID: cn1001025409
Skype ID: youlanda_lzsrblower
Wechat:15962136523
WhatsApp:+8615962136523
QQ:603682625
MOB:86-15962136523
Send Inquiry to This Supplier
You May Also Like
-
Easy Installation Industrial Blower FanUS$ 1 - 100000MOQ: 1 Piece
-
BOER-GL 50xL DC Cross Flow Fan /micro Blower Fan 12v Axial Cooling FanNegotiableMOQ: 1
-
2014 Bench Top Ionzing Air Blower Professional ManufacturerUS$ 100 - 120MOQ: 1 Set
-
Rotomolded Air Blower Blower Fan,power ToolsUS$ 20 - 200MOQ: 1 Set
-
Hydroponic Grow Systems Inline FanUS$ 20 - 40MOQ: 500 Pieces
-
High Quality 400W 16000r/min Electric BlowerNegotiableMOQ: 5 Pieces
-
Knapsack Blower EB650 High Quality TypeNegotiableMOQ: 1 Set
-
Backward Curved ImpellerUS$ 2.07 - 5MOQ: 1000 Pieces
-
Residential Use Heat Recovery Ventilation in Competitive PriceUS$ 200 - 2,000MOQ: 1 Set
-
Muiti-Tool Systems / Multi - Task Tools / Kombi SystemNegotiableMOQ: 100 Pieces
