Testing Oxygen Concentrator Portable Accurate Medical Oxygen Regulator
Testing oxygen concentrator portable accurate medical oxygen regulator
Function
1, Adopt 3 years imported long-life
electrochemical oxygen sensors.
2, This tester needs to correct
before use, please check the
correction instruction;
3, Please replace the battery if it's
low, or the numerical value will
show incorrectly;
4, This device will auto shut down
after turning on for 30 mins.
Corecction instruction
1, Turn on the device, connect the
pipette filler with the tester and pinch for 2-3 times to
suck the fresh air; 3 mins later, if the numerical value
is not within 20.9±0.5, then the tester needs to correct.
2, Turn on the tester, simultaneously press "Key 1" and
"Key 2" for 5 seconds, then loosen the keys and enters
the correction function.
3, Correction: press "Key 1" to increase 0.1%, press
"Key 2" to decrease 0.1%, until correct to 20.9+-0.05,
then shortly press the left key to exit. Then it's in test condition.
Testing oxygen concentrator portable accurate medical oxygen regulator
Quality control:
- Every procedure has personnel inspection.
- All the products must be tested and qualified before packaging.


Send Inquiry to This Supplier
You May Also Like
-
Static Pass Box(passing Box & Equipment for Clean Room)NegotiableMOQ: 1
-
High Quality Hydraulic Obstetric Delivery Surgical Table Manual Birthing ChildbedNegotiableMOQ: 1 Set
-
Quick Release Basket Ambulance Stretcher Band/strap/beltNegotiableMOQ: 300 Pieces
-
26 Pcs First Aid Kit,Car Emergency Kit,auto Safety KitNegotiableMOQ: 1000 Sets
-
First AidUS$ 0.5 - 0.5MOQ: 5000 Pieces
-
Emergency Blanket/Emergency Membrane/Rescue BlanketsNegotiableMOQ: 1000 Pieces
-
Plastic Aid Board by RotomouldedNegotiableMOQ: 1
-
Expert Supplier of Suction MachineUS$ 2,300 - 6,900MOQ: 1 Set
-
Shoulder Joint-functional Model Half Life SizeNegotiableMOQ: 50 Pieces
-
(KL600-II) Integral Single Head Wall Mounted OT Lights Led ot Lights Medical ot LightsUS$ 1,400 - 1,600MOQ: 1 Set









