Factory Direct Supply Flat Die Diese Wood Pellet Press

Diesel Wood Pellet Mill Introduction

Powered by diesel engine, this kind of pellet machine is a good choice for the people who want to save cost on energy consumption when making wood pellets. It can be used nearly everywhere in the world, especially popular in the electricity lacking areas. This kind of pellet mill with diesel motor can press a wide variety of ram material into high quality pellets, for example, it can do with the common biomass material such as sawdust, wood chips, straw, sunflower husk, grass, rice husk, crop stalk, wheat straw or other biomass materials with low adhesion rate. But one important factor you should not ignore is the moisture content of raw material, which should be kept at an amount of about 15%. If you have a lot of agricultural wastes or wood matters lying around your farm, it is the high time to put the wastes into great use. We also supply electric type flat die pellet mill to meet your different needs.

Performance Features of Diesel Flat Die Pellet Mill
1.Reasonable design, compact structure, small floor area, and low noise.
2. Perfect alternative for making pellets in electricity lacking areas.

3. Length and size of final pellets can be customized.
4. Integrally cast body, firm structure and long service life.
5. No binder or additive is needed in pellet making process.
6. Good adaptability to working place.
Structural Advantages of Diesel Flat Die Pellet Press
1. All the bearings adopt sealed structure, prevent dust entering.
2. Flat die and rollers are made of superior alloy steel, long working life.
3. Gearbox adopts high quality alloy steel, low noise and good cushioning effect.
4. The roller groove is narrow inside and wide outside, this unique design can reduce the materials which are pushed inside the groove when pelletizing.

5. Equipped with clutch, ensuring quick stop in case of emergency.
Main Parts of Flat Die Pellet Machine
* Roller parts: Rollers are the core parts of wood pellet press. The materials of rollers must be wearable and not easy to break. We adopt high-quality alloy steel and wear-resistant materials. Through the heat treatment of German vacuum furnace, the service life of rollers is extended for 5~7 times. The simplest pellet press has two rollers. But now, the new developed flat die pellet machine has three rollers, which has bigger capacity for making wood pellets.
* Die parts: As the basic part of wood pellet press, flat die has a series of die holes, which are used for extruding and shaping the raw materials. The hole diameters range from 2mm-10mm for your choice, and the depth of die holes depends on what material you want to pelletize. Our flat die is made of high quality alloy steel with suitable pellet die compression ratio.
* Bearings: All bearings adopt sealing structure in order to prevent the dust entering into the pellet machine, effectively improve the working environment of bearings and prolong the bearings life.

Technical Parameters of Diesel Flat Die Pellet Mill

Contact: Ms Zhao
Skype: AL.ZHAO.88
Tel/Whatsapp: 0086 18790279329
Email: sales10(at)allance(dot)cn