XSA-5 528pcs chicken/duck/quail egg incubator made in china

Specifications

1.Microcomputer full-automatic
2.High hatchability
3.Competitive price
4.Suitable for all poultry with different trays

 Poultry incubator hatchery machine 

chicken eggs	528pcs
duck eggs	378pcs
goose eggs	192pcs
quail eggs	1326pcs
voltage	220v/110v
power	200w
gross weight	70kgs
size	1.08*0.67*1.28m
payment terms	T/T, Western Union
MOQ	1 set

 

Features of incubator:                               
     1, high economic efficiency, hatchability above 95%,electricity is the main power 
     2, : electricity automatic controll,this incubator can be both used as full-automatic and manual operation.

     3, safe and reliable: The stove first heat the water in heater,  steam, hot water hose into the water pond, stoves, machines separate, the machine safe without smelly. The incubator selected high insulation nickel chrome plastic packets  to  heat.
    4, the incubator breed  on  top,  hatcher below ,  it is a multi-function machine.
    5, two-heating pipe,  two-wetting, double switch control heating and humidifying system.
    6, power-efficient. Incubators efficient 50 percent than the old style , applies to domestic users, save cost, earn more profit.
    7, oxygen function.it is the new XL wetting pump oxygen supply system, so that hatcher rate  is high.

 

 

  

 

 

  

 

 

 

 

 

 

FAQ

1.   Min. order:

One set, but if you need more than one set, the price will be lower, the more you buy, the lower the price you get.

2.   Payment terms:

T/T, Western Union, Escrow.

Pay 30% first, pay the balance after receiving the copy of bill of lading by email. If the value is very small, I hope you can T/T 100% in advance, we are five years gold member in alibaba. So we are the real factory, you can believe us.

3.     packing

wooden. Because the cargo will be took a long time to get to your side, the incubator must be packed very

strong to protect the body.

4.     Quality

We began to manufacture the incubator since 2007. we are the second incubator factory at that time. We have seven years experience in this field. I can not say we are the best, but we want to be better. If you have any good suggestions, please tell us, we will improve it.

I often receive some reply from our customers, they ask why your incubator is more expensive than other.

I just told them because of the quality, we want to supply you the high quality incubator. Please believe” the higher the price, the better the quality”

5. spare parts along with the incubator.

We will give you some spare parts along with the incubator for free. Like: heating tube, humidity tube, limited switches, egg turning motor and so on. Although the gurantee is one year, but you are far away from us, when you receive the spare parts, the eggs are all bad. So if possible, you can buy some spare parts.

 

FAQ in the hatching

 1.     the temperature is too hight all the time.

A} take apart of the controller, please check if the wire for NO.1, NO. 2 and NO. 3 is ok.

B} ambient temperature.

Please be sure the ambient temperature can not be above 30c, or it is bad for heat dissipation.

C} Close one heating tube, normally, there are two heating tube, if your side in very hot, you can close one heating tube.

D} open the ventilation hole.

E} please check if the water in the tank is hot. Normally, the water should be warm, if it is too hot, it can generate heat, so the temperature will be higher. If yes, please pour the cool water.

2. The heating tube doesn’t work .

A} take apart of the controller, change the wire 23 to 21, change the wire 24 to 22.

B} If you operate accoding to A, but it still doesn’t work, please check the heating tube, if not, please change a new heating tube, if the heating tube is good, there may be something wrong with the controller, you need to change a new controller.

3. low temperature.

hold the temperature sensor in the hand, please check if the figure on the controller is changed. If yes, please check the heating tube.

4.  some customer asked me why the chicken died in the shell after 18 days. There are two reasons.

a)        please check if you opened all the ventilation hole, because the chicken in this period need much oxygen, they may die because of the oxygen deficit.

b)      The humidity. You need to set the humidity higher than before in this period, it is easy for chicken to break the shell, or you may pul some water on the shell.