Tianjin PE watering pipe used for agriculture

MAIN TCHNICAL DATA OF PE WATERING PIPE:

1) DIAMETER: 16,25,32,40,50,63,75,90,110MM

2) WALL THICKNESS: 1.0-5.0MM

3) PACKAGING: AS YOUR REQUIREMT

4) FLOW RATE: 1.5-71L/H

5) WORKING PRESSURE: 0.8-1.5MPA

 We usually use the pe pipe as the main pipe for irrigation, make a hole by a puncher and then  connect the drip tape by a by pass,as below shows:

Range of application:warm house, green house, open farm field, gardens, forestry , crops.

Before buy the produce you should know the following questions, we will design the drip irrigation system according to your information.

1. The length and width of the land?

2. What plant do you grow ?

3. The distance of the row?

4. The source of water , from well or river or others?

Process flow of PE pipe, each working procedure must be inspected carefully by the inspector.

 1. all of our products with high quality, so we can reduce lots of quality problem.

 2. we have professional staff for the install, so if if you have any question , we will try          our best to give you a satisfying reply.

 3. 15years'  experience for produce and sells and install , which can eliminate your

     worries.

Company brief introduction

 Tianjin Chunyuan Longrun Micro-irrigation Technical CO.,LTD began its work in 1999, and established

 the company in 2000,which is the first company engaged in the production of drip irrigation system for

 saving  water agriculture. After 15 years development , we have three system now, drip irrigation system,

 spray  irrigation system and garden irrigation system.The main products including drip pipe, PE pipe, PE

 hose, filter system, fertilizer tank , pipe fittings. All of them have pass the ISO 9001 certification .