Plastic adjustable pressure compensating water drip emitter irrigation dripper

Drip Irrigation:

Brief Introduction:

Drip irrigation system delivers water to the crop using a network of mainlines, sub-mains and

lines with emission points spaced along their lengths. Each dripper/emitter, orifice supplies

a measured, precisely controlled uniform application of water, nutrients, and other required

growth substances directly into the root zone of the plant.
Water and nutrients enter the soil from the emitters, moving into the root zone of the plants

through the combined forces of gravity and capillary. In this way, the plant’s withdrawal of

moisture and nutrients are replenished almost immediately, ensuring that the plant never

suffers from water stress, thus enhancing quality, its ability to achieve optimum growth and

high yield.

Product  Description:

Specitication:                                         

Other family drippers:

Features:

• Recommended filtration: 130 micron / 120 mesh
• To be “inserted” into thick-walled pipes
• PC dripper deliver a precise amount of water regardless of changes in pressure due to long rows or change in terrain.
• Simplify the design of a system and greatly reduce the maintenance.
• Can be used either on the mainline or at the end of 1/4" tubing.

Product in Pots:

Note: 1. their seal pessure is 3PSI, and operaing pressure is 6PSI.

           2. above dripper with 1/4" Barb Adaptor, for installation use Dn3mm Punch.