HDPE sun sail shade waterproof, triangle/rectangilar car parking shade net 

HDPE red para dar sombra

Advantage:

(1) The shade net  can be used for gardening, vegetables field. We offer different size and color, according to customer requirement.

(2) No harm to human or environment.

(3) Exported to more than 15 countries in Europe, America and South East.

Choose us, do not hesitate:

(1) Technical team: We have a professional technical team. Customer's sample is always welcomed.

(2) Professional factory: We are manufacturer, specializing in manufacturing plastic textile for 7 years; competitive price with good quality. With UV produced by Germany BASF Chemical Company, the products can be endured at least 3 years.

(3) Sample: We can give out sample in 5 days, but the shipment charge usually paid by your side, the fee of it will be rebound when we have formal order.

(4) Rapid response to your needs: We will answer within 24 hours. Welcome to contact us if you have any problems. We are looking forward to cooperating with you.

mixed colors  ( blue and white ) , 140gsm , made of 100% New HDPE , 3-5 years use 

black color 80gsm                                                  black color with PE sides and  Buckles

green color 

Details  of Yarn 

1) Circular Yarn

2)  Tape Yarn  

3) Circular + Tape Yarn

Shape and Color available

Shade net is used to provide shade against sunlight and control temperature.

Shade net can also be used to protect flowers,trees against frost,wide and hail damage 

It can also used for temporary fencing,packaging applications,greenhouse covering.

How to make a shade sail

Gather your supplies

Step 2

 For each post, dig a 400 x 400mm hole 800-1000mm deep. If ground is firm, lay about 100mm of 20mm aggregate in base of hole. If ground is soft, pour about 100mm of concrete in hole.

Step 3 

Bore a hole near bottom of pole and insert a galvanised steel bolt with nut. This keys post in concrete and stops round posts rotating. Fit a heavy-duty, stainless-steel eye bolt 50-100mm down from top of posts. Use double nuts (1 a lock nut) so it cannot undo.

Step 4

Stand posts in holes with eye-bolt facing diagonally opposite post. Brace posts with temporary props and ensure they are plumb in 2 directions.

Step 5

Fill each post hole with a fairly dry concrete mix and tamp concrete well. For most smaller sails (under 5m square), posts can be vertical, but for larger sails, move top of post away from opposite post by 150-200mm, so it leans out from sail slightly to help take the strain. Re-tamp concrete and finish surface with a slight slope away from post so water can drain. Let concrete cure for 24-48 hours.

Step 6

While concrete cures, secure wall and fascia pad eyes, if required. Never rely on the fascia alone; fit fascia supports to fasciae and rafters first to give adequate strength. If fixing to masonry, use an appropriate anchor system. In many cases, a chemical anchor is ideal, but an alternative is to use epoxy together with a conventional masonry anchor.

Step 7

Once concrete has cured, spread sail back out on ground. Attach fixings to corners of sail with turnbuckles wound out to as slack as possible (you will need turnbuckles on at least 2 corners). Lift each corner to an eye bolt, then tension sail using turnbuckles or tension straps. If you need to extend length of fixing, use straps. Re-tension fixings as necessary over time and clean sails periodically.

Balcony safety nets 

Production process 

Packing in rolls ,  or in samll pieces

Rayee International Corporation Limited 

Tel : 86-25-85399266 , 58071170

Fax: 86-25-85399267

Skype: rayee2030

Email :  rayee2030(at)