Contact Platform Support
Help CenterReasonable Price of POLYACRYLAMIDE/APAM HY-1285
Related Products
-
PAMNegotiableMOQ: 10 Tons -
PAM/APAM CPAM NPAM/polyscrylamideUS$ 1,385 - 1,610MOQ: 5 Tons
-
PAC 26-31% Polyaluminium Chloride Powder for Water Purification TreatmentUS$ 240 - 320MOQ: 5 Tons
-
Hongye Supply PAC 30% Polyaluminium Chloride Powder for Water Purification TreatmentUS$ 190 - 320MOQ: 10 Tons
-
Hongye Supply PAC/Polyaluminium Chloride/aluminium Chloride Powder for Water Purification TreatmentUS$ 240 - 320MOQ: 5 Tons
Specifications
Polyacrylamide1.Good thickening ability.
2.Dosing quantity is 1/50 of the inorganic flocculant.
3.clarify water promptly.
Anionic PAM polyacrylamide
Description:
Anionic polymer flocculant is mainly used for the treatment of solid minerals in the neutral suspension. It is used to improve the removal effect of the suspended solids, COD and phosphate in the urban and industrial wastewater treatment. In the drinking water and wastewater treatment, it is used in the surface water clarification.
Characteristics:
The product adopt the technics of adding alkali in the propenamide and then make them homopolymerization and hydrolysis, after granulation, drying and crushing, it appears as a small white powder of granular solids.
Functions:
This series excels in flocculation. For its performance in purification, clarification, sedimentation promotion, filtration promotion, thickening, and other aspects, it can satisfy demands in various fields like wastewater treatment, liquid waste disposal, sludge thickening and dehydration, mineral separation, coal washing, and papermaking.
Application Method & Notes:
1, It is recommended to prepare the product in water solution at 0.1% concentration. It is proposed to use the neutral and desalted water.,
2,The product should be scattered evenly in the stirred water, and the dissolving can be accelerated by warming the water (below 60°C).
3,The most economical dosage can be determined based by a preliminary test.,
4,The solid product is packed in inner plastic bags and further in polypropylene woven bags with each bag containing 25Kg. The colloidal product is packed in inner plastic bags and further in fiber plate drums with each drum containing 50Kg or 200kg.
5, This product is hyqroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
6, The solid product should be prevented from leaking on the ground because the hygroscopic powder can make the floor slippery.
Our product
Our packaging & warehousing
Welcome to our domestic website:
Send Inquiry to This Supplier
You May Also Like
-
Aramid Air Slide Fabric, Nomex Air Slide Membrane, Kevlar Air Slide Belt, High Temprature Air Slide ClothUS$ 100 - 200MOQ: 1 Meter
-
Chemical AuxiliariesNegotiableMOQ: 2400 Kilograms
-
Sodium Gluconate CAS 527-07-1 25kgUS$ 100 - 2000MOQ: 1 Ton
-
Automatic Spray System Release Agent for Automotive Parts - 20L Drum CapacityUS$ 1 - 4MOQ: 200 Kilograms
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
