DF-21 PTFE fine powder

Specifications

PTFE fine powder DF-21
1.molding power micro powder
2.Extrusion grade
3.High quality ,Big manufacture
SGS and any inspeciti

PTFE fine powder DF-21

molding power micro powder

Conformable with Q/DYG 001-2002 Item DF-21
First Grade Qualified Grade
1 Smoothness & Cleaness select the worst of φ18×1000mm extruded tubes and have a test:Clean & and white surface , no metal impurity,the impurity quantity from 1mm to 3mm 1mm doesn't excced two , wothout impurity which exceed 3mm. select the worst  of 3 φ18×1000mm extruded tubes and have a test::clean & white surface , no metal impurity , the impurity quantity from 1mm to 3mm doesn't exceed four without imputity which excced 3mm.
2 Tensile Strength, Mpa  min 27 25.5
3 Enlong at rupture (%)  ≥ 250 250
4 Volume Density(g/L) 650±50 650±50
5 Average Grain (um) 750±50 750±50
6 Flowing property (g/min)≥ 450 450
7 machining  method ram extrusion
8 Main Usage The prensintered resin is suitable for  extruding  rod ,tube , 
9 Packing,Storage,Transportation 1,PTFE is packed in double layer PVC bags inside and in hard circular barrels outside . On the  barrel , there attached lable and quality certificate ,brand, perfromance standard, variety , trademark, grade, batch, net weight, packing date,   packer, quality analyst.
2,PTFE should be stored in clean dry warehouse to prevent from dust , moisture ,etc impurity.
3,The products are transported  according to non-dangerous goods. Heat, moisture, freeaing and strong shock shold be avoided during transportation. Over -bumpiness and compression is apt to make the resin bind together.