Frp/grp Pultruded Frp Profile

frp/grp pultruded frp profile

FRP pipe is in the filament winding process, using quartz sand layer will strengthen, make its have sandwich structure, such as reducing the comprehensive cost of the pipeline, and improve the overall strength and stiffness of the pipeline.

This kind material is fully impregnated with resin, the mixture of continuous glass fiber, glass fiber rovings, continuous mat, surface mat and so on  reinforcing material, through the mold and heat cured in the mold cavity, under the action of traction mechanism rally, can be  continuous pulled infinite length of FRP pultruded profiles. Pultruded profiles can be re-shaped highly, all kinds shape of pultruded profiles can be made into a variety of steel products through appropriate combination

Charateristic:
— Light weight, high strength, and convenient transportation and installation.
— Excellent corrosion resistant, it can be used under the condition of seawater environment for long time.
— Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time.
— Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, 

decrease the cost of the running & maintenance.
— Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class.

Factory production of FRP pultruded products include:

1,  The profiles of various cross-section shape and size

2, squeeze pull gratings and closed deck.

3, the whole FRP fence, ladder and handrail systems.

4, tent frame, rods and tubes.

5, insulation ladder profiles.  

6, squeeze pulling cable tray and frames

7, cooling tower frames

8,fixed hanging rod for Meter

9,glass fiber reinforced plastic hollow board, refrigerated compartment skeleton.

10,communication base station used covering .

11,the Anti-dazzle Board and Guardrail fro highway

12, anti-skid and anti decay deck

13, Fiber glass grating

14, the othe rcustomized profiles

15, tool handles; and so on

Specification:
—Diameter:DN25~DN4000
—Pressure:0.25Mpa~2.5Mpa
—Temperature:-45°C~120°C
—Length of single pipe: DN<250 ,L=6m ;DN≥12m ;the length can also be made according to the requirement of the user.

 connection way :

Connection way can adopt screw connection, spigot and socket connection, flange connection, plain end butt 

connection, sleeve connection, etc connection way.

Application:
FRP pipe can be used for every kind of pipeline system of ocean engineering and ship, such as: fire protection water supply system, 

brine water supply pipeline, cooling water, potable water pipeline, process pipeline, ballast piping, lio loading & unloading pipeline, 

ship’s bottom sewage pipeline, sprinkler system, freshwater pipeline, sanitation water supply pipeline, board water drainage pipeline, 

depth-measuring pipe, vent pipeline, water drainage pipe and cable protection pipe etc.

Welcome to Shuangyi Environment Engineering Co., Ltd

Pls Feel Free to Contact Me:

Rita Gao

International trade manager

Tel: 0531-8987 9218

Mob:0086-155 5419 5354

E-mail: cnfrp365 ( at ) 

Skype: cnfrp369