Contact Platform Support
Help CenterHot Selling Hdpe WITH HIGH PERFORMANCE
Related Products
-
HDPE Blowing Molding GradeUS$ 812 - 1,010MOQ: 1 Ton -
Recycled HDPE/ Black / Manufacturer/pipe of Water Supply and DrainageUS$ 885 - 1,000MOQ: 1 Ton
-
High Density Polyethylene/ Hdpe Virgin Granules/ Hdpe Cheap PriceUS$ 842 - 1,044MOQ: 10 Tons
-
Suppy Virgin Hdpe / Ldpe / Lldpe GranulesUS$ 854 - 1,000MOQ: 1 Ton
-
Pipe Grade HDPE,High Density Polyethylene (HDPE) PE 80 ,PE100 With Factory PriceUS$ 826 - 1,071MOQ: 1 Ton
1. virgin ldpe hdpe granules Properties:
It's a low-density, crosslinked, unfilled polyethylene compound desighed for medium cable insulating. This compound has an extremely low leverl of contamination. It's recommend to use are extremely low level of contamination. It's recommendto use as XLPE insulation for crosslinked polyethylene.
Application: Houseweres, High gloss toys, Low thickness articles Blown film extrusion, Lamination, Extrusion coating, Injection molding
2. virgin ldpe hdpe granules Specifications:
No. |
Property |
Unit |
Test |
Data |
1 |
Melt Flow Index |
g/10min |
GB/T3682-2000 |
≤2.0 |
2 |
Density |
g/cm3 |
GB/T1033.1-2008 |
≤0.955-0.978 |
3 |
Tensile strength |
Mpa |
GB/T1040.3-2006 |
≥20.0 |
4 |
Tensile yied strength |
Mpa |
GB/T1040.3-2006 |
≥16 |
5 |
Elongation at break |
% |
GB/T1040.3-2006 |
≥650 |
6 |
Brittle temperature at low temperature |
°C |
GB/T5470-2008 |
≤-76 |
7 |
ESCR ,FO |
H |
GB/T2951.41-2008 |
≥500 |
8 |
Oxidation induction period at 200°C |
Min |
GB/T2951.42-2008 |
≥30 |
9 |
Content of Carbon black |
% |
GB/T2951.41-2008 |
2.60±0.25 |
10 |
Carbon Black dispersion |
-- |
GB/T18251-2000 |
≤3 |
11 |
Ceka softening point |
°C |
GB/T1633-2000 |
110 |
12 |
Tensile strength after thermal aging |
Mpa |
GB/T2951.12-2008 |
≥20.0 |
12 |
Elongation after thermal aging |
% |
GB/T2951.12-2008 |
≥650 |
13 |
Elongation at Low Temperature |
% |
GB/T2951.14-2008 |
≥175 |
16 |
Dielectric strength |
Mv/m |
GB/T1408.1-2006 |
≥25 |
17 |
Volume resistivity |
Ω.m |
GB/T1410-2006 |
≥1*1014 |
18 |
Dielectric Constant ε |
F/m |
GB/T1409-2006 |
≤2.75 |
19 |
Dielectric loss factor tgδ |
-- |
GB/T1409-2006 |
≤0.005 |
Send Inquiry to This Supplier
You May Also Like
-
High Impact Resistance Injection Household Appliance Parts Molding Grade Granules TAIRILAC Virgin ABS Resin AG15A2US$ 1.2 - 1.8MOQ: 25 Kilograms
-
Injection Molding Grade TAIRILAC Virgin ABS Resin AG15A2 High Impact Resistance Granules for Household Appliance PartsUS$ 1.2 - 1.8MOQ: 25 Kilograms
-
ABS TAIRILAC A G0NP Ningbo Taihe Ultra-high Impact Resistance and High Rigidity Used in Safety Helmet Tubular ProductsUS$ 1.2 - 1.8MOQ: 25 Kilograms
-
ABS TAIRILAC AG15E1 Ningbo Taihua High Gloss, High Impact Resistance, Suitable for Electronics and Electrical ApplicationsUS$ 1.2 - 1.8MOQ: 25 Kilograms
-
Hot Sale TJ Dagu High Impact ABS Resin DG417 Injection Molding Grade Pellets Plastic Raw Material for Auto PartsUS$ 1.2 - 1.6MOQ: 25 Kilograms
-
Hot Sale TJ Dagu High Impact ABS Resin DG417 Injection Molding Grade Pellets Plastic Raw Material for Auto PartsUS$ 1.2 - 1.6MOQ: 25 Kilograms
-
Tianjin DaguHigh Impact Resistance Injection Molding Flame Retardant V0 ABS Plastic Masterbatch DG-FR11 for Parts ElectronicsUS$ 2 - 2.2MOQ: 25 Kilograms
-
High Impact Resistance V0 ABS Plastic Masterbatch DG-FR11 Tianjin Dagu Flame Retardant Injection Molding for Parts ElectronicsUS$ 2 - 2.2MOQ: 25 Kilograms
-
Masterbatch ABS DG-T513NParts Electronics High Impact Resistance Tianjin Dagu Flame Retardant V0 ABS Plastic Injection MoldingUS$ 1.2 - 1.6MOQ: 25 Kilograms
-
ABS Red Tri-Crystal DG-MG29 Tianjin Dagou High Impact Resistance for Automotive ApplicationsUS$ 1.2 - 1.6MOQ: 25 Kilograms
