Contact Platform Support
Help CenterVirgin Hdpe Granules
Related Products
-
Factory Virgin/recycled Hdpe/LDPE Granules,Hdpe Resin,Natural Virgin Hdpe Injection/film GradeUS$ 844 - 1,001MOQ: 1 Ton -
Plastic Virgin and Recycled Hdpe GranulesUS$ 874 - 1,036MOQ: 1 Ton
-
Suppy High Quality! Virgin PP /HDPE / LDPE / LLDPE GranulesUS$ 885 - 1,036MOQ: 1 Ton
-
Grade A Recycled / Virgin HDPE / LDPE / LLDPE Granules for SaleUS$ 788 - 1,000MOQ: 1 Ton
-
the Good Quality Polyethylene HDPE/LDPE Virgin Granules Wholesale in ChinaUS$ 822 - 1,036MOQ: 1 Ton
1.Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. It’s stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water.
HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes.
HDPE Injection grade, red, blue, green,
HDPE Blow grade, white, grey, black
HDPE Pipe Grade black pellet
HDPE coating grade
And So On
3.Specification
HDPE cable material Property |
Typical Value |
|
Mass density g/cm 3 |
0.941-0.959 |
|
Melt flow Rate(190 centidegree /2.16kg)g/10min |
≤1.0 |
|
Tensile yield strength MPa |
≥19.0 |
|
Flexural modulus Mpa |
≥965 |
|
Elongation@ break % |
≥400 |
|
Impact Embrittlement temperature centidegree |
MAX -118 |
|
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
|
Volume resistivity OHM-CM |
MIN 1x10 15 |
|
4.Products Properties
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
5.Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.
Send Inquiry to This Supplier
You May Also Like
-
High Impact ABS Plastic Granules for Injection Molding Virgin ABS Industrial Material ABSUS$ 2 - 4MOQ: 25 Kilograms
-
Gpps Granules 525 Polystyrene Plastic Raw Material Refrigerator LinerUS$ 1.16 - 1.2MOQ: 25 Kilometers
-
Hot Sale ABS Plastic Material High Gloss ABS Pellets Abs Price Per kgUS$ 2 - 4MOQ: 25 Kilograms
-
Gpps Granules Price Virgin GPPS Ps Raw Material PS 123 PS125 Granules Low Price for Disposable Plastic Polythene ResinUS$ 1.16 - 1.2MOQ: 25 Kilometers
-
ABS High-temperature Resistant, Modified ABS Granules for Automotive Applications Car Air Conditioning Vents/dashboard FramesUS$ 2 - 4MOQ: 25 Kilograms
-
Chinese Factory Transparent Gpps TAIRIREX 535NUS$ 1.16 - 1.2MOQ: 25 Kilometers
-
ABS General Purpose Extrusion Grade ABS Sheet Material Granules ABS Granules for Manufacturing Advertising Boards/Luggage CasesUS$ 2 - 4MOQ: 25 Kilograms
-
General Purpose Polystyrene GPPS Resin GPPS Granules Plastic Raw Material Virgin GPPS GP525US$ 1.16 - 1.2MOQ: 25 Kilometers
-
ABS Beads Antibacterial and Antifungal ABS Granules Silver Ions, ABS for Medical Devices/Air Purifier Housings V0 ABS ResinUS$ 2 - 4MOQ: 25 Kilograms
-
Good Quality Gpps 525 Row Material Gpps Granules High Gloss Gpps Polystyrene Use for Plastic CupUS$ 1.16 - 1.2MOQ: 25 Kilometers
