Sandwich Tile Backer XPS 10mm Foam Board

 Sandwich Tile Backer XPS 10mm Foam Board

Production Description

Type: XPS Boards
Place of Origin: QingDao, China (Mainland)
Brand Name: OUKESI
Model Number: OKS TB-1
Level of fire resistance:
Material: XPS,fiberglass mesh,cement mortar 
Length:1200mm-3000mm(inch:47.24"-118.11")
Width: 600mm-1200mm(inch:23.62"-47.42")
Thickness: 10mm-150mm(inch:0.79"-5.91")
Density: 25kg-35/m3  
Thermal Conductivity:0.030-0.036W/(m.k)
Compressive Strength: 250-700Kpa
Function: waterproofing and insulation
Application: Bathroom,kitchen,floor heating
Color: customeized  

CE approved Shiplap XPS tile backer board is water resistant insulated tile backer board made of extruded polystyrene, faced on both sides with a fiberglass mesh embedded into a thin cement polymer mortar.
They are widely used in the under floor heating system as a structural tile backer boards. Shiplap XPS tile backer board also can be used in the floor, wall and ceiling by acting as a very efficient moisture and thermal barrier.

Characteristics:

# A watertight layer on walls and floors in wet rooms and bathrooms

# An insulation layer in under floor heating to avoid heat loss

# Partition walls in wood or steel frames

#Light weight

#More easily to install and easy to cut

#Environment protectiong, instead of gypsum board and fiber cement board

Packaging&Shipping

Packaging Details: PE/Plastice/Poly bag
Shipping: by truck/ by sea/ by air

Detail: Within 15-20days after receiving deposit

Company Information

Oukesi founded in 2003 is the largest heat insulation materials' factory in shandong , and it is the earliest professinal factory heat engaged in making environmental and heat insulation materials. Our company has 36 offices throughout the country. In QingDao, our company covers an area of 12000 square meters plant in total. It fixed assets of 50 million. There are variety of new type building materials XPS board, EPS board, Rock wool board, shower tray board, tile backer board, EPS decoration cornice, etc. They are widely used in civil construction market, such as roof, wall and floor. Our products are exported to Australia, Singapore, Romania, Ukraine, kazakhstan, Russia etc.

According to <Montreal Protocol on Substances that Depletethe> to avoid of CFCS products continue to damage earth's ozone layer in dustrial. Oukesi became the first XPS extruded industry funded by UN Montreal multilateral foundation. Our company selected CO2(carbon dioxide) composite foaming technique to replace as HCFC-22 and HCFC-142b. Under the strong support from the Ministry of Environment Protection, the corporation achieves long-term technical communication strategic cooperation relations with Germany GTZ technical corporation company and International Industry Union Organizations in 2009. The corporation was chosen as XPS extruded industry technical innovation pilot enterprise in China by the United Nations environmental protection agency and the Ministry of Environment Protection in 2010. It provides a lot of valuable production technical data and experience for China’s future extruded board CO2 technology renovation project, also has great contributions for China’s environment protection causes.

Our Factory

Our Workers

Our XPS Boards

XPS is extruded polystyrene insulation board.It is a polystyrene resin as raw materials and other raw materials and polymer, by heating mixed into the catalyst at the same time, and then extruded extrusion forming and the manufacture of rigid foam plastic board. XPS with perfect obturator honeycomb structure, this structure makes XPS board has a very low water imbibition (almost no water absorption), low thermal conductivity coefficient, high pressure resistance, aging resistance.

1.Heat Insulation
It has high heat resistance. Because of the characteristics of the structure of 99% closed area to form a vacuum layer, avoid air flow cooling, to ensure that the insulation performance of lasting and stable.
2.High compressive strength
Due to the special structure of the XPS board, its high compressive strength. According to the different thickness, it can reach more than 250-700 kpa.
3.moistureproofing
Due to the molecular structure of polystyrene is not bibulous, its structure is stable, no clearance. To solved the problem of leakage, seepage, frosted, condensation.
4.Lightweight and Anticorrosion
Because of closed-cell foam chemical structure and honeycomb physical structure, make its have the characteristics of light weight.For a long period of time, XPS don't decompose, aging, and don't produce harmful substances.
5.Environmental Protection
XPS is green building materials. We applied the world's most advanced foaming(CO2) process. It doesn't produce any pollution.

Other products

EPS Board

http://preview.china.cn/product/60398402609-802609694/Heat_Insulation_EPS_Foam_Board.html

Rock Wool Board

http://preview.china.cn/product/60398539937-802237535/Grade_A_Fire_Resistant_Rock_Wool.html

EPS decoration cornice

http://preview.china.cn/product/60391798856-802277326/EPS_Decorative_Cornice_Molding.html

Exterior wall insulation decorative board

http://preview.china.cn/product/60391936772-802268924/Stone_Coating_Decoration_Insulation_Board.html

Our certificates

Website: http://oukesi.en.china.cn/

Welcome to contact us!