RF Professional Skin Treatment Portable Fractional Co2 Laser Equipment 100um-2000um
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Specifications
1 CE approved
2 America technology
3 900 mm luminophor
Aesthetic Equipment for Scar Removal co2 fractional laser
Brief Introduction:
1.10600nm fractional co2 laser machine
2. skin rejuvenation, acne treatment, scar removal, skin smooth
3. suitable for clinic, center use
Applications:
1. Remove stretch marks
2. Eliminate the scar, Traumatism
3. Improve Pore Bulky
4. Skin rejuvenation
5. Skin tightening and loosen (Deep Wrinkles and Shallow wrinkles)
Theory - co2 fractional laser
6. Remove freckles and pouch
7.Actinic keratosis
8.Basal cell carcinoma
9.Burn debridement
TREATMENT PICTURES
SPECIFICATIONS
Basic information |
Wavelength |
10.6μm, far-infrared laser |
|
Pulsed radiofrequency |
0.530 W |
||
pulse width |
3.5 - 4.5ns optional |
||
power |
Average power: 1-40W |
||
Matrix mode |
Scan Graphics |
Square, rectangle, round or customized graphics |
|
Dot quantity |
400 dots at most |
||
Working state |
ultra-pulsed mode |
||
Scan mode |
Sequence scan or Random scan |
||
Pulse energy |
1mj to 100mj is optional for each dot. |
||
|
Technical specification |
Laser apparatus |
Sealed off laser device stimulated by direct current |
|
Condenser focus |
f=50mm |
||
Beam divergence angle |
0.3 mrad |
||
Spot size |
≥0.2mm at the focus |
||
Radiation time / Interval time |
0.01 1 s |
||
Aiming beam |
Less than 2mW, 635nm red semiconductor laser |
||
Beam transport device |
Articulated arm with six segments and balance weight |
||
Net weight |
45 kg |
||
Size |
53x57x138cm |
||
Power supply |
220V/110V |
||
ADVANTAGES
1 RF deliverying tube ,no need to change.
2 It emits very fine and well arranged laser which can penetrate to corium layer directly.
3 7-jointed articular light conduat,accurate treatment.
4 Individual laser structure design, greatly facility laser
and easy daily maintenance;
5. Excellent treatment results, no side effect .
6. Wide range application, effective treatment.

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Send Inquiry to This Supplier
You May Also Like
-
Distributors Wanted Co2 Ultrapulse Laser With High QualityUS$ 1 - 10,000MOQ: 1 Set
-
High Quality Unqie Technology Upgraded Ultrapulse Laser Model EquipmentUS$ 1 - 10,000MOQ: 1 Set
-
CE Approval Ultrapulse Laser Body Contouring EngravingUS$ 2 - 2,800MOQ: 1 Set
-
Ultrapulse Laser Therapy For Hair Reduction LPUS-INegotiableMOQ: 1 Set
-
2016 Hot Seller Professional Ultrapulse Laser Vein Removal Machine/Vascular Spider Veins RemovalUS$ 2,800 - 4,500MOQ: 1 Set
-
2017 Hot Seller Professional Ultrapulse Laser Vein Removal Machine/Vascular Spider Veins RemovalUS$ 0.01 - 0.02MOQ: 1 Piece
-
2015 Hot Seller Professional Ultrapulse Laser Vein Removal Machine/Vascular Spider Veins RemovalUS$ 1 - 2,000MOQ: 1 Set
-
Face Whitening CO2 Fractional Ultrapulse Laser Beauty Equipment RF Fractional Portable Skin Renewing CO2 Laser Machine/fractional Laser Co2 Ultrapulse Remove NeoplasmsUS$ 1 - 2MOQ: 1 Unit
-
2.6MHZ Sun Damage Recovery Medical Erbium Co2 Fractional Salon And Ultrapulse Laser Skin Resurfacing Equipment 220V 22V 10600nmUS$ 1 - 6,000MOQ: 1 Set
-
Ultrapulse Fractional Co2 Laser Medical LaserUS$ 1 - 5,000MOQ: 1 Unit





