Contact Platform Support
Help CenterMedical Equipments Fractional Co2 Mole Removal Laser For Scar Removal Vagina Tightening
Related Products
-
Vaginal Rejuvenation Medical Equipments Skin Regeneration Fractional Co2 LaserUS$ 1,000 - 6,000MOQ: 1 Set -
2016 Distributor Wanted Table Top Portable Fractional 0.1-2.6mm Co2 Laser Machine With Rf Metal Tube 10.6umUS$ 5,000 - 10,000MOQ: 1 Set
-
Portable Fractional rf Metal Tube Co2 Laser for Virginal TighteningUS$ 1,000 - 6,000MOQ: 1 Set
-
New Technology Fractional rf Co2 Laser Scar RemovalUS$ 1 - 10,000MOQ: 1 Set
-
Face Lifting Best Selling Products In America Stretch Mark Removal Laser Equipment Co2 Fractional For Scar RemovalUS$ 1,000 - 6,000MOQ: 1 Set
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
Medical equipments Fractional co2 Laser for scar removal
Model:Fractional Co2 laser
Fractional CO2 Laser
The medical product (Fractional CO2 Laser) is widely applicable to general surgery, dermatology, gynecology, E.N.T., paediatrics, urology, and used for cutting, cauterizing, carbonization, gasification, hemostasis and other treatment. It is particularly applicable to plastic surgery for removing various wrinkles, acne and acne scars, surgical scars, traumatic scars and benign skin neoplasm.
The design and manufacture of Fractional CO2 laser machine is in full compliance with the relevant national standard GB11748-1995, “CO2 Laser Treatment Machine”, National Standard GB7247.1-2001 “Safety of Laser Products, Part 1: Equipment Classification, Requirement and User Guide ”, National Standard GB9706.1-1995 "Medical Electrical Equipment”.
Fractional co2 laser equipment applicationTechnology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
1. 10600nm co2 laser, various wrinkles,
2. acne scars, surgical scars
3. Shrink pores
4. Remove stretch marks
5. Skin tightening and loosen (Deep Wrinkles and Shallow wrinkles)
6. Remove freckles and pouch
7. Actinic keratosis
8. Basal cell carcinoma
9. Burn debridement
Spare parts
|
Laser’s wavelength
|
10600nm or 10.6µm |
|
Wavelength of the target |
635 nm |
|
Power of Target optical |
≤ 5mw |
|
Diameter of Focal spot |
0.25mm |
|
Area of Focal spot |
0.05mm2 |
|
Output Power |
≤40W (optional) |
|
Operating voltage |
AC 220V ± 10%, 50Hz |
|
Graphic area |
≤ 20mm × 20mm |
|
Mode of Spot |
single-mode |
|
Operation |
Intermittent and continuous work |
|
Scan mode |
switching: order, disorder, parallel |
|
Refrigeration system |
Air-cooled and water |
|
Optical system |
7 articulated arms |
|
Output mode |
Super-pulse dot-matrix |
|
Output graphic |
triangle / square / rectangle / circle/ Oval / hexagon / linear (scalable) |
|
Net weight |
50Kg |
|
Gross weight |
62kg |
We are tensa laser technology co.,ltd,we are engaged is this industry for eight years,so we are more professional for making beauty machine.
Our company purpose is pursuit of excellence,perfect product and wonderful after sevice.
OUR VALUE MESSAGE IS “QUALITY IS OUR CULTURE”
“WITH US YOUR MONEY IN SAFE YOUR BUSINESS IN SAFE”
1. 100% after-sales quality assurance, Support Many payment method;
2. All other specifications of beauty equipment are available according to your requirement(OEM&ODM)! Factory price you will get from NUBWAY
3. We can provide professional operation training.
4. Nd yag laser, cryolipolysis machine, hair laser machine etc with CE certifications and strong supply ability.
Send Inquiry to This Supplier
You May Also Like
-
Rejuvenation Beauty Equipment Clinic Use Erbium Laser Skin ResurfacingUS$ 1 - 10,000MOQ: 1 Set
-
Medical CE 2940 Fractional Erbium Laser Skin ResurfacingNegotiableMOQ: 1 Set
-
1540nm Non Ablative Fractional Erbium Laser Skin Resurfacing EquipmentNegotiableMOQ: 1 Set
-
Erbium Fractional Laser Skin Resurfacing Equipment/Fractional Erbium Laser EquipmentUS$ 1 - 15,000MOQ: 1 Unit
-
2014 Hot Product Laser Equipment Wart Removal Co2 Fractional Acne Scar RemovalUS$ 7,000 - 10,000MOQ: 1 Set
-
Fractional CO2 Laser Erbium CO2 Laser Skin Tightening Laser Machine Dermatology EquipmentUS$ 900.00 - 1000.00MOQ: 1 Set
-
Scar Removal Skin Resurfacing Erbium Laser MachineNegotiableMOQ: 1 Unit
-
1927nm Laser System for Fractional Skin Resurfacing in Medical SpasUS$ 5500 - 5800MOQ: 1 Unit
-
Erbium Laser Erbium Glass LaserUS$ 1 - 10,000MOQ: 1 Piece
-
Laser Skin Resurfacing Types: CO2 LaserUS$ 1 - 5,500MOQ: 1 Piece
