Body Light Diod Laser Electrolyse 50-60HZ Laser Hair Removal Machine SE8 0-150J/cm2
808 diode laser hair removal machine Theory :
The System use special laser with long PulseWidth 808nm, can penetrate to hair follicle.
Using Selective light absorption theory, laser can be preferentially absorbed by the melanin of the
hair And then heating the hair shaft and hair follicle, moreover to destroy the hair follicle and oxygen
Organization around hair follicle. When laser outputs, system with special cooling technology, cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment!
body light diod laser electrolyse laser hair removal machine SE8
1. Features
1. Treatment handle using sapphire optical crystal as light guide, never worn, life-long use without replacement.
2. Semiconductor refrigeration, air cooling, closed loop force strong temperature water cooling system, make sure long time continuous work. The water flow sensor and water temperature sensor, effect cooling system, greatly increase the life of the machine and the safety facto
3. Treatment time is short, quick recovery, do not effect patient's normal work
4. Skin test function: Using adjustable high-powered video camera , can see clear treatment effect before and after treatment, and stored by the file management system.
2. Effective: steady energy is achived by b. US made laser rod ensures 100,000,000shots.(every shot, steady energy) but during our testing it went to 10 million shots. c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.) d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment. e. High speed DC pump made in germany, which keeps TEC chilled water flowing. f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.
a. Japan made Capacitors which stabilizes.
Permanent Hair removal of all body part : beard, lips,arm ,leg ,armpit hair,bikini line and so on
Improve pigment ,dark color of the mole ,burgundy birthmarks and other symptoms
System working conditions
1. Temperature of environment :5~40℃
2. Relative Humidity:≤80%
3. Power supply:Single-phase AVC 220V,110V ±10% 10A 50/60Hz
Along with the machine main body , there is one input power plug, as the standard single-phase three-pin plugs (international standard plug for power network connection)
3. Installation
Open the package, and check all the accessories first as the Accessories List , to make sure all the accessories are in good condition
Water to the apparatus :
1:One time you need to enter 8L cooling water, the water must be distilled water, so that keep the laser generator not burn and long life. Damage caused by the not distilled water, our company can not warranty.
2:For the first time , when the water enough to " high water level", stop inject water, turn on the machine working 3 to 5 minutes to let the water cycle in the machine, emptying the gas in water cycle pipe. Then turn off the machine and inject water again till to the " high water level"
Installation and disassembly of diode laser treatment handle:
Disassembly: Press the two buttons above and below the handle connector at the same time , and pull out gradually. |
Installation: plug in the connector vertical according to the right direction, until you heard the sound of "ka ka " |
Note
1,You must turn off the machine when you do the above installation and disassembly of the handle
2, After change the handle,while inject cool water, you need to pay attention to the handle connectors, if there are water leak, please drain all water first, disassembly handle, and keep connectors on handle and machine dry,and install again and then inject distilled water again.
3,If do not use this machine for long time or need to transport, please make sure drain all the water.
4,Change water: every month you need to change the used distilled water with new distilled water
5,Before put the handle back to the holder, you must make sure the handle switch button is on "OFF" station , there are no light produced by the laser generator . (For fear of damage the holder and machine inner electric boards )
System parameters
Diode laser Wavelength |
808,940nm±5 nm |
Energy density |
1 J/cm22 |
Spot size |
12×20mm2 |
Frequency |
1,2,3,10 |
System Voltage |
220V50HZ/110V60HZ |
Dimension after package |
45×65×100cm |
Net weight |
55Kg |
Gross weight |
Kg |
- Treatment room must have a stable and reliable power supply system with ground protection
- Adapted voltage range : 200V - 240V or 100V-120V
If your local voltage beyond this range , we recommend you add a regulator, and the regulator's power should be greater than 3 KVA.
Every time finish treatment, you need to clean the treatment handle, especially the crystal light guide . You can use gauze or a cotton swab dipped in 75% alcohol wipe the crystal 3 to 5 times .
Please feel free to contact us
Send Inquiry to This Supplier
You May Also Like
-
808nm Permanent Hair Removal Machine Hair RemovalUS$ 1 - 5,500MOQ: 1 Set
-
Professional Permanent Hair Removal MachineUS$ 500 - 2,500MOQ: 1 Piece
-
Laser Permanent Hair Removal MachineUS$ 1,000 - 2,300MOQ: 1 Set
-
Allibaba Com Hair Removal Permanent Hair Removal Machine for WholesalesNegotiableMOQ: 1 Set
-
Best Price Permanent Hair Removal MachineUS$ 1 - 2MOQ: 1 Set
-
Permanent Hair Removal Machine and IPL Wrinkle Removal (B208)NegotiableMOQ: 1 Set
-
808nm Diode Laser Hair Removal Permanent Hair Removal Machine for Home UseUS$ 5,000 - 15,000MOQ: 1 Unit
-
Germany Import Bars 808nm Diode Laser Hair Removal, Permanent Hair Removal MachineUS$ 1 - 6,000MOQ: 1 Set
-
Hair Removal Beauty Equipment/Permanent Hair Removal Machine/Long Pulse Laser EquipmentUS$ 1 - 4,000MOQ: 1 Set
-
In-Motion Operation Ipl Opt Permanent Hair Removal MachineUS$ 1 - 3,500MOQ: 1 Piece




