Contact Platform Support
Help CenterCE MARKED 808 nm Diode Laser System/GOOD Selling Diode Laser System
Related Products
-
Multi-functional Beauty Machine/beauty Equipment(CE Approved)US$ 6,000 - 6,500MOQ: 1 Unit -
Haemangioma Treatment CE MARK Q Switched Nd Yag 532nm Laser Nd Yag Laser Tattoo Removal Machine/tattoo Machine 2012NegotiableMOQ: 1 Unit
-
Brown Age Spots Removal Ce Hair Removal Laser Er Glass Laser Machine /laser Therapy Equipment/top Laser /tattoo Removal Machine Hori Naevus RemovalNegotiableMOQ: 1 Unit
-
Haemangioma Treatment Ce Hair Removal Laser Er Glass 1-10Hz Laser Machine /laser Therapy Equipment/top Laser /tattoo Removal MachineNegotiableMOQ: 1 Unit
-
Professional Vertical Style for Beauty Clinic Best Price Er Glass Lasrs Machine With CE Approved and Competitive PriceUS$ 27,500 - 28,000MOQ: 1 Unit
Specifications
808 nm diode laser hair removal technologyon sales 808 nm diode laser hair removal machine
CE Marked
1. Treatment principle
808 nm diode laser hair removal technology is based on the selective absorption of light and heat. The laser goes through the epidermis layer to reach the root of hair follicles, laser can be absorbed and converted into heat to destroy the hair follicle and the surrounding oxygen tissue; Meanwhile, the particular super cooling system can creat certain anesthetic effects, to protect the epidermis layer from burn by laser energy, which ensure a safe and effective treatment.
At the same time, 808 nm diode laser heat hair follicles to 48°C under lower energy density mode, hair follicle cells will loss activity after sustaining sliding from the handpiece, so as to get the effect of permanent hair removal.
2. Application range
Hair removal: permanently remove armpit hair, hairline, beard, whiskers, lip hair, body hair, bikini hair or any other unwanted hair for all skin type .
3. Equipment consist
This machine is microcomputer controlled. It is composed of three parts:
Mainframe, control panel, diode laser handpiece.
The operation and control parts are in the mainframe, the built-in integrated micro controller can monitor the operation of equipment continually.
The control panel include: touch LCD screen (show the system working mode and parameters), key switch, emergency switch.
The treatment handpiece include: laser emitter and transmission system, handheld operation by user.
4. Technical Specification
Parameter |
Value |
Wavelength |
808nm |
Pulse Width |
25ms~950ms |
Repetition Rate |
1Hz~20Hz |
Energy Fluence |
0~120J/cm2 |
Skin Cooling |
TEC + Sapphire |
Laser Window |
10x16mm |
Laser Cooling Liquid |
Purified Water |
Cooling Water Volume |
3.5L |
Handle Piece Flow Rate |
3.5~4.0L/min |
LCD Screen |
8” Touch LCD |
Pedal Switch |
Support |
Environment Temperature |
5~30°C |
Environment Moisture |
<80% |
Input VAC |
220VAC / 50-60Hz |
Dimension |
~78x46x96cm |
N.W. |
~45KG |
G.W. |
~55KG |
II. Safety
808nm laser treatment is a safe and reliable way to remove unwanted hair. As long as the trained and qualified medical personnel operate and maintain properly, it can make sure the safety operation. Operator and maintain personnel should fully understand the safety information provided in this chapter. The safety of patients, operators and other personnel comes first.
Using sealed white gem crystal to transmit l laser to the patient's skin, the light
pulse can only be emit from the front surface of the gem crystal.
Shut off power by emergency switch when accident happens.
Key switch is to prevent abuse of the machine.
The buzzer beeps when the device is ready to emit light pulse.
2.1 Cautions
2.1.1Safety prevention
To ensure the safe operation, pls pay attention to safety prevention and read the warning below carefully:
A. Except the company's authorized technical staff, other person is forbidden to examine and repair the laser machine, especially the internal machine, including power supply, cooling systems, optical components and diode laser hand piece
B. Make sure rated voltage conform to the voltage in your country (200/208V or 220/230V)
C.Maintenance only after the machine is turned down and power cord is unplugged, to avoid danger and damaging the machine.
D. The gem crystal should always be kept clean. It should be cleaned after each treatment
E. It is banned to start machine if laser hand piece leak water; if already start, it must be shut down immediately.
2.1.2Cautions in operation
A. Diode laser may hurt the eyes or cause flame and burns. Necessary protective measures should be taken in operation.
B. Excessively emit laser light to treatment area may damage the skin, cause proliferation / atrophy / abnormal pigmentation.
C. Do not look directly at the laser emitted from the handpiece.
D. Do not air-launch laser light, When not in use, the handpiece should be hanged on the hook; when operation, the laser should point to the treatment area.
Send Inquiry to This Supplier
You May Also Like
-
High Energy Density Professional Photoboimodulation Device, LED Light Whole Body Therapy MachineNegotiableMOQ: 1 Set
-
Portable SMAS HIFU Machine for Beauty Salon Wrinkle Reduction Anti-Aging Facelift TreatmentUS$ 400 - 500MOQ: 1 Unit
-
Professional IPL Skin Rejuvenation Machine 15x50mm Spot Size 110V/220V Touch Screen ControlUS$ 2000 - 3000MOQ: 1 Combo
-
Latest Safety Vascular Remove Csa Approved Ipl Laser MachineUS$ 1 - 10,000MOQ: 1 Set
-
2016 New Style Globalipl Jet Skin Whitening Wrinkle Removal Oxygen Facial Machines Skin MoisturizingUS$ 1 - 10,000MOQ: 1 Set
-
Rechargeable Battery Facial BrushUS$ 1 - 18.66MOQ: 500 Pieces
-
1 HZ Lowest Price ND YAG Tattoo Laser Removal Machine Laser Machine For Tattoo Removal Freckles RemovalUS$ 1 - 1,850MOQ: 1 Set
-
Promotion! the Year-end Sales Affordable Diode Laser Hair Removal Machine PriceUS$ 3,000 - 7,000MOQ: 1 Set
-
2016 Manual Mini Derma Roller for Skin CareUS$ 2.5 - 10MOQ: 200 Pieces
-
Microcurrent Multifunction Facial Massager, Antiwrinkle Beauty ApparatusUS$ 10 - 13MOQ: 1000 Pieces
