Contact Platform Support
Help Center30 Walt Ablative CO2 Fractional Carboxytherapy Laser Wrinkle Removal Peeling Machine Laser Resurfacial Skin Resurfacing RF
Related Products
-
Birth Mark Removal Ablative RF CO2 Fractional Face Whitening Laser Peeling Machine Laser Resurfacial 0.1-2.6mm Face LiftingUS$ 1 - 15,000MOQ: 1 Set -
Co2 Laser Resurfacing Fractional rf Laser for Stretch MarksNegotiableMOQ: 1 Set
-
Best Quality Fractional Laser Co2 Burn Debridement TreatmentNegotiableMOQ: 1 Unit
-
1ms-5000ms 2013 Beauty Equipment Beauty Tumour Removal Machine Fractional Co2 Laser AblationUS$ 1 - 15,000MOQ: 1 Set
-
Professional C02 Laser for Cosmetic HospitalNegotiableMOQ: 1 Set
Fractional Co2 laser treatment:
Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.
Fractional Co2 laser treatment:
1. How do I know if I need CO2 laser?
Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.
2. What benefits can I expect?
Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking
3. Is there another way to get the same effect?
Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.
Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.
30Walt Ablative CO2 Fraxellaserlaser
CO2 fractional laser metal frame inside
CO2 fractional laser accessories
1.CO2 fractional laser principle
CO2 fractional laser effect principle is "focal photothermal effect ". Skin tissue has ability to repair itself. The skin was injury by trauma, but it could heal itself. The wound area is too large, the results of repair of scar formation. The wound is small, the skin can completely recover. Fractional laser every effect to skin only on one of the small region to generate thermal stimulation, retaining portion of skin is not affected, the role of tissue to the skin to stimulate collagen receipt hyperplasia, and no effect of skin tissue can be used as thermal diffusion region, avoid the possibility of thermal injury and other side effects, and can quickly promote skin healing, reach, and improve scars, skin firming pores purpose.
2.Treatment
Perfect skinwhiteningwrinkle removal acne preventionfacial beauty for human tissue burningvaporization and coagulation. Mainly used for local and facial skin, repair skin light aging, improve uneven skin, large pores, rough skin, the skin relaxation phenomena, especially applicable to dispel various scars and wrinkles, acne, tattoo, stains, and pigmentation, as well as on the surface of any part of a variety of moles, warts, acne, skin tag, treatment of hemangioma.
3.Color touch screen control panel
4.Technical parameters
| Laser wavelength | 10.6 μm ± 0.1μ M |
| Three output mode | Ultra pulse, continuous output and dot matrix output |
| The output terminal of power | 1~40W |
| Lattice point output energy of each | 5mj-100mj ( 16 speed adjustable ) |
| Fractional output total energy | 125mj+1kj |
| Scanner focal length | f=50mm ( FFLS ) or f=100mm ( HFLS ) |
| Focal spot diameter | ≤ 0.1mm≤ 0.2mm ( FFLS ), ( HFLS ) |
| Treatment of depth | 2000μ m ( FFLS ), 600 μ m ( HFLS ) |
| Guidelines for glory | Green semiconductor laser ( 532nm,≤ 5mW ) |
| System control |
microcomputer control 1. How do I know if I need CO2 laser?
Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.
2. What benefits can I expect? Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking
3. Is there another way to get the same effect?
Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects. |
| Exhaust system | built-in smoke system |
| Cooling system | built-in closed water cooling circulation system |
| Display | interface ( 10.4 inch color touch screen ) |
| Light guide system | 2 joint torsion spring joint arm ( export) |
| Way of working | galvanometer scanning ( lattice ): |
| FFLS scan size | a maximum of 15*15mm |
| HFLS scan size | a maximum of 20*20mm |
| The oval, triangular (standard and adjustable ) | |
| Scan rate | >10m/s continuous: 1~30W, every step 1W adjustable; |
| Pulse frequency modulation Pulse frequency modulation | 0-999Hz, every step 1Hz adjustable |
| Environment temperature | 5~40 degree |
| Relative humidity | ≤ 80% |
| Power supply | 220V, 50Hz, 3A |
| Dimensions | 500mm 650mm 1100mm |
| Weight | 50kg |
| Scanning pattern | rectangle, square, triangle, circle, ellipse, straight line |
| Pulse interval | 0-5000ms, every step 1ms adjustable |
| LCD | 8/10.4 |
5.Curative effect contrast
6.package
aluminum alloy case
Principle:
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
Principle:
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.
Send Inquiry to This Supplier
You May Also Like
-
Profession Diode Medical Laser MachineUS$ 1 - 2MOQ: 1 Set
-
Machine Laser Diodo Hair Removal /medical Laser Machine /808nmUS$ 1,000 - 7,000MOQ: 1 Set
-
China Medical Laser Machines Surgical Diode Laser 30WUS$ 3,500 - 6,000MOQ: 1 Set
-
Manufacturer Ablative Co2 Medical Laser Machine for Face ResurfacingUS$ 1 - 10,000MOQ: 1 Set
-
CE Approved Depilation Medical Laser Machine With Photo Detection SystemUS$ 1 - 2,990MOQ: 1 Unit
-
Manufacture Beauty Equipment Scar Removal Co2 Medical Laser MachineUS$ 1 - 10,000MOQ: 1 Set
-
(3 in 1 CE Proof) Ipl rf Medical Laser Machine With 3handles OB-NE 02US$ 1 - 3,999MOQ: 1 Set
-
Professional Tattoos Removal Medical Laser Machine Facial Veins Treatment 532nm/1064nm Q-switched Nd-YAG Laser Hori Naevus RemovalUS$ 1 - 2MOQ: 1 Piece
-
White Eyebrow Removal 2013 Professional Multi-Functional Beauty Swing Arm Equipment Co2 Medical Laser Machine Face LiftingUS$ 1 - 3,600MOQ: 1 Piece
-
RF Effective CO2 Fractional Wart 8.0 Inch Removal Laser Beauty Salon Machine CarboxytherapyUS$ 6,000 - 12,000MOQ: 1 Set
