Remove Neoplasms Beauty Salon Clinic Use Co2 Fractional Laser Aesthetic Equipment Portable

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

beauty salon clinic use co2 fractional laser aesthetic equipment   

Working Principle:

Fractional CO2 laser therapy works mainly on the principle of fractional heat damage. The fractional CO2 laser creates microscopic holes in the upper layer of skin and leaves the deeper part of the skin intact. The purpose of the treatment is to create controlled heat damage at the basal layer of skin leading to the reduction of wrinkles, pigmentation and acne scarring. The fractional CO2 laser also tightens and refines the skin as well as improving the long term collagen and elastin reproduction.

Applications:

1.Scar removal (2 kinds treatment modes: Fractional mode for scanning; Pulsed mode for cutting) ,all kinds of excavated type of scars, like traumatic scars, surgical scars, hypertrophic scar and smallpox scar,etc.

2.Remove wrinkles around eyes, such as crow's feet, the forehead and around mouth.

3.Removal warts, small tumor of the skin resection.

4.Skin rejuvenation and skin lifting and resurfacing.

5.Surgery operation, Dermatology: cauterize, incise, solidify and radiate for tissue of human body.

6.Remove stretch marks and other kinds pitting scar,acne scars.

7.Remove melasma, freckles, age spots,etc.

Part Details:

 Theory - co2 fractional laser

Specifications & Parameters:

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Wavelength:10600nm

Power Output:1-30W adjustable

Laser Type: US COHERENT RF CO2 laser

Spot mode: single-mode

spot diameter: 50um-2000um

Pulse energy: 10mj-100mj stepping 2mj

Scan Shapes: Square; Rectangle; Circle; Triangle; Rhombus; Ellipse;

Line Beam Patterns: Standard; Random;

Scatter Aiming Beam: 635nm Aiming

light power: ≤5mw

Beam Delivery : Articulated 6-joint arm with up to 360° rotation

Cooling: Self-contained, closed cycle Stand-by

Working :Continuously for 18 hours

Electrical Requirements: AC 220V±10%,50Hz

Net Weight: 38 kgs

Effect contracts:

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc