TEC Sapphire Cooling 808nm laser diode hair removal beauty device

Features:   portable 808nm diode laser / diode laser hair removal / hair removal

1. High quality 400W diode laser stack from Germany, make over 15 millions of shots.

2. Micro cooling system makes diode module working much safer. Under cooling level 5, sapphire can reach 0 degree in 60 seconds and can reach -5 degree in 90 seconds.

3. Pure sapphire makes the laser can penetrate completely and effectively work on hair.

4. Best power case from Taiwan, ensure the stable and efficient working of laser.

5. Top quality pump and high quality water tube ensure high speed and safe water flow.

6. Real intensity (scientific setting between intensity, pulse duration and frequency), the smart software ensures all energy output are real, safe and protect machine and patient from burning.

7. Safety inspection (including water temperature, water flow and handpiece identification) when machine is turned on. This ensures machine working in an absolute safe environment. Without shooting in 2 minutes, the cooling level will turn down automatically.

808nm Diode Laser Hair Removal use special laser with long Pulse-Width 808nm, can penetrate to hair follicle .Using selective light absorption theory, laser can be preferentially absorbed by the melanin of the hair and then heating the hair shaft and hair follicle, moreover to destroy the hair follicle and oxygen organization around hair follicle. When laser outputs, system with special cooling technology, cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment.

Application:

1- A Gold standard in hair removing

2- For dark skin for which IPL hair removing isn’t safe

3- Skin rejuvenation

808nm diode laser hair removal machine treatment areas:

Machine real photos:

808nm diode laser hair removal treatment photos: 

Hair removal effect: laser hair removal / h  Operation display:        

Advantages of 808nm diode laser hair removal machine:

1)Machine protections:

a)Cooling: when operator does not shot with handpiece, the cooling degree will automatically come to “0” in 2 minutes.

b)Water temperature: operator could adjust a temperature number like 35 centigrade. When machine temperature reaches 35 centigrade, machine can not shot and should have a bit rest.

c)Water flow: If water flow is not smooth, the icon of water flow will be red.

d)Handpiece: If handpiece is not well connected, the handpiece icon on screen will be red.

e)Any abnormal of above points, machine will stop work by itself.

2)Reasonable parameters:

a)Skin types: There are total 6 skin types, operator could choose different skin types for different treatments. Meanwhile, operator could also save the parameters of these skin types.

b)Intensity: It’s from 3 to 40 J/sqm, which is real and low level.

c)Frequency and energy: This 2 parameters are inverse ratio. Energy becomes higher, the frequency is lower by itself. This is to avoid high energy + high frequency to burn skin.

3) Handpiece: Germany imported micro channel bar, which could reach 10 millions shots.

4) Other functions:

a)The maximum shot number could be adjusted by software, distributor could add the maximum shots, which is good for distributors to sell more handpieces.

b)There are 6 languages for customer to choose.

Why D8 is safe, Painless in treatment

1 Max energy is 40J, which is true energy. All other Energy over 40J is fake or dangerous.

2 Strong cooling, treatment head can reach 0 °C within 1 seconds, and treatment Tip is Sapphire

3 Intellective Parameter setting, Energy is higher, the Frequency is lower by itself. Avoid high energy+high frequency burn skin.

4 Self checking for water tempt. Water circulation, Handpiece working status. Any abnormal, machine will stop work by itself.

5 low flounce, high repetition rate pulses slowly increase the temperature of the hair follicle containing the cells responsible for hair regrowth.

Why 808nm Continous working time can reach over

 4 hours and Handpiece life Span can Reach

15million-20million shots.

1. Powerful Water circulation , Use High Powerful diaphragm pump 4 times water pressure than normal pump.

2 .Micro Water Channel Make ventilation better.

3. Cooling will stop working within 2 minutes when no laser shot, because continuous cooling will easy freeze inside of the handpiece, which easy damage the laser mould.

Service of Hot Newest Germany 808nm Diodes Laser Hair Removal Product 

1. OEM is allowed, we can add your company logo to machine and screen;
2. ODM is allowed, we can manufacture new product according to your requirement;
3. Free language service, we can make different languages menu, now we have Spanish, French, English and Italy, Germany, Russia menu.