Birth Mark Removal Vascular Removal Co2 Laser Fractional Beauty Equipment CE Approved Tattoo /lip Line Removal
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
vascular removal Co2 laser fractional beauty equipment CE approved
Technical parameter
|
CO2 laser system The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis. The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate. |
Model K12
|
Diameter Spot |
0.2mm |
Spot Spacing |
0.2-2mm |
Wavelength |
10600nm |
Peak Power |
800W |
Pulse duration |
100μm-10ms(Adjustable |
Laser output modes |
Continuous, Single pulse, Repeat Pulse, Ultra Pulse. |
Aiming Beam |
5mw Diode |
Control |
Touch Screen |
Out Put Frequency |
1-1000Hz |
Electrical |
230/220V |
Scanner Weight |
0.7/1.5kg(Optional) |
Cooling |
Water |
Scanner Size |
60*60*40mm |
Power |
15W |

Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Send Inquiry to This Supplier
You May Also Like
-
Professional Skin Resurfacing & Scar Removal With 10600nm CO2 Fractional LaserUS$ 1100 - 1300MOQ: 1 Unit
-
Vertical Fractional CO2 Aesthetic Laser CO2 Fractionado Machine Fractional CO2 Fractional Laser Machine Dermatology EquipmentUS$ 1000.00MOQ: 1 Set
-
Co2 Fractional Laser 30w Co2 Laser Beauty EuuipmentUS$ 1 - 9,800MOQ: 1 Set
-
CO2 Fractional Laser and Laser CO2 Fractional VaginalUS$ 1 - 15,000MOQ: 1 Unit
-
PayPal Payment Body Shaping Co2 Fractional Laser rfUS$ 1 - 88MOQ: 1 Piece
-
Fractional Co2 Laser , Co2 Fractional Laser , Laser Co2US$ 7,000 - 10,000MOQ: 1 Set
-
2015 New Hot Fashion Supreme Quality 10600nm Co2 Fractional Laser Beauty Machine Vaginal RejuvenationUS$ 130 - 130MOQ: 1 Set
-
High Power ce CO2 Laser/ Fractional CO2 Laser/ CO2 Fractional LaserNegotiableMOQ: 1 Unit
-
CO2 Fractional LaserUS$ 1 - 10,000MOQ: 1 Set
-
2015 CO2 Fractional Portable Co2 Fractional LaserUS$ 7,000 - 8,000MOQ: 1 Set





