Fractional Co2 Laser Scar Removal/Co2 Sun Damage Recovery Fractional Laser /Fractional Co2 Laser Equipment Skin Resurfacing

Wavelength:

10600nm

Laser apparatus:

Sealed off laser device simulated by direct current

Optical beam quality:

TEM00

Output power:

30w

Spot size:

0.02~0.05mm2

Aiming beam:

Red semiconductor laser (635nm, less than 5mw)

Beam transport device:

Articulated arm with 7-joint and balance weight

Working mode:

Continuous operation

Output Mode:

Continuous, single pulse, interval pulse and super pulse

Scan scope:

Max 20mmx20mm

Scan graphics:

Circle, triangle, square, rectangle,hexagon, ellipse, line

Scanning Mode:

Random , Normal and Midsplit scan

Scanning speed:

More than 10m/s

Energy:

1- 30W

Pulse width

0.1-5.0ms

Distance:

0.1-2.6mm

Input power:

450VA

Cooling system:

Water and air circulation

Environment temperature:

5°C~40°C

Relative humidity:

Less than 80%

Power:

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

110V / 220V