China top 1 factory co2 laser power source

aluminous alloy case

Specifications

co2 laser power source
1.skin rejuvenation
2.ance & pigment removal
3.Various scars removal

co2 laser power source

1.skin rejuvenation
2.ance & pigment removal
3.Various scars removal

GL060 medical laser equipment fractional co2 laser  co2  fractional  laser

1. Skin renewing and resurfacing
2.  Smooth burnt scars and surgery scars, etc
3.   Wrinkle removal, skin tightening
4. Acne and acne scar removal
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery 

7. OEM service

 

GL060 fractional co2 laser equipment  Brief Introduction

Adopt RF-excited laser system enables the output quality more stable, uniform compared to CO2 fractional laser with glass tubes

 

fractional co2 laser Treatment Theory

Fractional laser light penetrates the skin with tiny thermal channels through the random scanning, creating an ablative and thermal effection only channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.

 

fractional co2 laser Application

1. Application Range of Fractional treatment handpiece
   1. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
   2. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
   3. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
   1. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
   2. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

 

GLO60 fractional co2 laser Advantages

1. Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes
2. Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)
3. Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients
4. Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests' unique request.
5. 12.1"  TFT touch LCD, rotated 360° gives you a luxury enjoyment;
6. Reserved entry access for laser room ensures a safe treatment
7. Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership.

 

GL060  fractional co2 laser SPECIFICATION

 

Laser Type	CO2
Wavelength	10600nm
Beam Delivery	7-joint arm
Maximum Output Power	30W/40W
Optical Beam Quality	TEM
Spot Size	0.12-1.25mm (Adjustable)
Power of the Aiming Beam	Less than 5mW
Aiming Beam	635nm
Scanning Mode	Randomized Scanning
Laser Operating Mode	UltraPulse, CW, Fractional
Cooling	Air Cooling
Pulse Energy	10mj~200mj (every stepping:2mj)
Spot Pattern	Triangle/Square/Rectangle/Rhombus
Pulse Interval	1ms~100ms (every stepping:1mj)
Scan Area	10mmx10mm,20mmx20mm,30mmx30mm
Working Mode	Continuous operation
Spot Density	36 spots/cm²,144 spots/cm²,576spots/cm²,with intermittent loading
Power Supply	AC 220V 50Hz/AC 110V 60Hz
Net Weight	45KGS
Gross Weight	60KGS
Dimensions(before packaged)	650mmx340mmx760mm
Dimensions (after packaged)	760mmx455mmx975mm