2015 Hot New Machines!!!co2 Fractional Laser Remove Neoplasms 10600nm Skin Resurfacing Machine Sun Damage Recovery 8.0 Inch

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

Factory Direct Sale!! Fractional Co2 Laser Machine with CE

 co2 fractional laser skin resurfacing machine

1. Skin renewing and resurfacing

2. Smooth burnt scars and surgery scars, etc

3. Wrinkle removal, skin tightening

4. Acne and acne scar removal

5. Remove intractable chloasmas and pigmentation

6. Sun damage recovery

7. OEM service

Introduction of  Fractional Co2 Laser Machine with CE

Adopt RF-excited laser system enables the output quality more stable, uniform compared to CO2 fractional laser with glass tubes

Theory of  Fractional Co2 Laser Machine with CE

co2 fractional laser skin resurfacing machine

Fractional laser light penetrates the skin with tiny thermal channels through the random scanning, creating an ablative and thermal effection only channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.

Application of  Fractional Co2 Laser Machine with CE

1. Application Range of Fractional treatment handpiece
   1. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
   2. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
   3. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
1. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
2. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Advantages of  Fractional Co2 Laser Machine with CE

co2 fractional laser skin resurfacing machine

1. Three modes of laser energy output are selective: UltraPulse, CW and Fractional modes
2. Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent, (compared to ordinary CO2 laser installed with glass tubes)
3. Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone. Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients
4. Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during the treatment, satisfy different therapiests’ unique request.
5. 12.1” TFT touch LCD, rotated 360° gives you a luxury enjoyment;
6. Reserved entry access for laser room ensures a safe treatment
7. Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which will be offset by a much lower total of ownership.

SPECIFICATION of  Fractional Co2 Laser Machine with CE

 co2 fractional laser skin resurfacing machine

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

PICTURES of  Fractional Co2 Laser Machine with CE

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2.