Face Lifting Raynol Laser Supply 40W 1ms-5000ms RF Tube Laser Equipment CO2 Fractional
Application:
1. Application Range of Fractional treatment handpiece
a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
c. Reconstruction of photoaging skin.
2. Application Range of Incision Handpiece
a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc
Raynol Laser Supply 40W RF Tube Laser Equipment CO2 Fractional
Fractional Co2 Laseris utilizing the most advanced micro-lens technology, which allows laser system to produce a large number of ultra-pulsed beams, these ultra-pulsed beams act on the skin to form a diameter of 0.12-1.25mm, depth of 0.1-1mm micro-hole, so that a large number of micro-invasive skin area (micro thermal zone) and heat accumulation zone or micro-heating area are formed, they also can form regional gasification that act on the skin pigment organization, while the heat’s accumulation in the dermis will make collagen protein do immediate skin contraction, and proliferate the collagen, then achieves the effect of wrinkle removal, scars removal, skin rejuvenationand solve skin problems and abnormal pigment removal.
Treatment Range Co2 Laser
1. Laser wrinkle removal
2. Laser scar removal
3. Syringoma and steatoadenoma removal;
4. Seborrheic keratosis and actinic keratosis treatment;
5. Skin Rejuvenation
6. Striae gravidarum removal
7. Vaginal rejuvenation available
Advantages:
1. Used both on the epidermis and dermis;
2. No ablation and no intervention to skin;
3. The risk of formatting scar and pigmentation has been largely reduced;
4. Do not influence your common work;
5. Long time keeping and short time recovery and with sequel;
Technical Parameters:
Laser Type |
Ultra-pulse Laser |
Work Program |
Fractional and Scans |
Wavelength |
10600nm |
Spot Size |
0.12-1.25mm |
Laser Emitter |
40W |
Penetration Depth |
0.1-1mm |
Out Put Way |
7 Articulated Arms |
Interface |
10.4" Color Touch Screen Theory - co2 fractional laser CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis . It is the most beneficial skin recovery system and can achieve the long-term effect of collagen remodeling as well as improvement of aged skin conditions due to exposure to light. It can be very safely applied to various types of scars compared to the existing 100% total layer skin peeling lasers (CO2 or Er: YAG). In addition, it does not require a long period of recovery or side effects. It can remodel various types of deformed scars and skin tissue very effectively.
|
Dimension |
450*550*1400mm |
Cooling System |
Air Cooling |
Power Supply |
220V/110V; 50/60Hz |
CO2 laser system
The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.
The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.
Before & After Co2 Laser
Raynol (Beijing) Technology Co., Ltd. is a supereminent professional manufacturer, which specialized in medical & beauty Laser devices such as Q-switch Nd:YAG Laser, IPL Machine, E-light Machine, RF Machine, Fractional Co2 Laser
1. How does FRACO2 work?
Fraco2 works by producing columns of laser beams which precisely penetrate to the level of wrinkles or scars, and stimulate your own skin to replace the old collagen with new “baby” collagen. In between the laser beams, the skin remains intact, allowing healing to occur quickly.
2. Who is suitable for Fraco2?
- Moderate to severe facial wrinkles
- Moderate wrinkles neck, hands
- Sun damage and brown spots
- Acne and other Scarring
3. What does the treatment involve?
The treatment involves using the laser over a complete area or whole face. It is not suitable for a single wrinkle line or fold.
A numbing cream is applied to the area for at least 1-2 hours prior to treatment, and in some cases local an aesthetic injections are used. Pain puffers and medication can also be used if needed.
The laser is applied to the affected areas. At the end of the treatment the area will look like small white or red dots that disappear by the following day. There is usually redness that lasts at least 7 days, and swelling for a few days. Most people need about 5 days off work.
4. How many treatments will I need?
Depending on the degree or wrinkling or scarring and your expectations, you would usually need 1-3 treatments. Some people need more, especially those with severe acne scarring.
5. Is Fraco2 painful?
Pain really depends on how strong you use the Fraco2 laser. In most cases, it is essential to use at least a numbing cream, and often local anaesthetic injections are also used. For increased comfort, pain puffers and other painkillers may be used.
After the treatment, there is some discomfort for about 1 hour. It is best relieved by using ice, cold air, or cold compresses.
6. What do I look like after the treatment with Fraco2?
Immediately after the treatment you will look red, with tiny white dots, or pinpoint bleeding on your skin. These dots usually disappear the next day. Swelling will last a few days and redness at least 7 days. You can apply makeup usually after 3 days, but you usually need a few days (5-7) days off work.
7. What do I do after the treatment?
1.Take antibiotics to prevent infection (depending on the doctor’s decision)
2.Use light non greasy moisturizer and sunscreen, the clinic will recommend one that is suitable for your skin.
3.You may wish to take anti swelling tablets for a few days.
4.You may wish to use compresses with white vinegar and water for the first 24 hours to reduce swelling.
5. Apply makeup after the a few days.
6. Wash your skin with a gentle cleanser eg Cetaphil lotion.
7. If you have darker skin, you may need to use a bleaching lotion after the treatment to prevent post treatment increase in skin pigmentation.
8. What sort of result can I realistically expect?
Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).
Send Inquiry to This Supplier
You May Also Like
-
Cynosure Affirm CO2 Skin Resurfacing LaserUS$ 1 - 5,500MOQ: 1 Piece
-
(CE Proof ) Co2 Skin Resurfacing Laser Co2 Laser MachineUS$ 1 - 9,800MOQ: 1 Set
-
Beauty Salon Equipment Co2 Skin Resurfacing With Great PriceUS$ 1 - 10,000MOQ: 1 Set
-
Vertical Fractional Laser Co2 Skin Resurfacing and Vaginal Rejuvenation TreatmentUS$ 2,000 - 9,500MOQ: 1 Set
-
Hot New Products for 2016 Excellent Vaginal Rejuvenation (rf) Fractional Co2 Skin Resurfacing MachineUS$ 1 - 10,000MOQ: 1 Set
-
Best Fractional CO2 Skin Resurfacing Laser TreatmentUS$ 1,000 - 9,999MOQ: 1 Set
-
Skin Resurfacing Vagina Rejuvenation Fractional Co2 Skin Resurfacing Laser Vagina Machine For Woman Treat TelangiectasisUS$ 2,000 - 5,000MOQ: 1 Unit
-
Professional Co2 Fractional Laser Promotion Price Co2 Skin Resurfacing Medical Professional Co2US$ 6,599 - 12,399MOQ: 1 Set
-
CE Certification CO2 Laser Laser Type and Stationary Style Co2 Skin ResurfacingUS$ 1 - 3,000MOQ: 1 Unit
-
Co2 Skin Resurfacing Wrinkle Acne Scars Removal Machine -PCR030DSNegotiableMOQ: 1 Set














