Newest CRYO+CAV Cryolipolysis System and Radio Frequency for Fat Loss and Wrinkle Removal/anti Cellulite Machine

 Newest CRYO+CAV cryolipolysis system and radio frequency for fat loss and wrinkle removal/anti cellulite machine 

Parameter

1.Cryo handle Light wavelength: 492 - 455nm

2.Voltage:220V/50Hz or 110V/50Hz or 110V/60Hz;

3.Touch Screen:8 inch True color touch screen;

4. Power Consumption: ≤400W;

5. Cooling device output temperature: 5 degree~-5°C degree

6. RF frequency:   5Mhz

7. Cavitation frequency: 35~40K hz

8. Cooling device output pressure: 0-100Kpa

9. Cooling liquid: pure water, with 4litres

10. Default working time: 1-60 minutes

11. Fuse size: F3AL250V

12. Relative Humidity: 85%

13. Atmospheric pressure:88KPa ~110KPa   

14. Laser wave length:  diode laser 635-650nm

15. Maximum output power of laser part:  52W

16. Laser intensity:

   3.0W/CM2(Belly),3.6W/CM2(Thigh),2.4W/CM2(Arm),1.5W/CM2(Face)

Accessories

1. Fat freezing handle: 1 pcs

2. Cavitation heads:     1 pcs

3. Sextupole RF head:  1 pcs

4. Lipo laser pads:  12  pcs; 4 pads small(1 lamp/ pad); 8 pads big(8 lamp/ pad)

  Sextupole RF head with lipo laser

Cavitation head

40kHz focused ultrasound cavitation effect, to cause tons of microscopic air bubbles to surround the lipocyte (fat cell) membranes and with its resonant frequency, the bubbles cause a high enough pressure to cause the fat cells to break up instantly.
The broken lipocytes are then moved to the liver and safely metabolized out of human body which is assisted by drinking a lot of water.
It produces lipolysis of fatty acids from adipocytes (fat-laden cells) due to a phenomenon known as stable cavitation, and increased cell permeability of the adipocytes. You get an increased flow of triglycerides. Furthermore, there is a breakdown of the fibers through mechanical action (jet stream). Finally, some content of adipocytes is metabolized by the liver and eliminated in the urine 

New Fat freezing handle,   our cryolipolysis heads is transparent, when doing treatment patient can see how the treatment going, patient can see how much the fat is absorpted by the handle, many clients like this design.

The default  treatment time is 30 minutes, the maximal  treatment time is 90 minutes, because our treatment temperature  is accurate, the error will not exceed  1 °C, and machine temperature is 5°C ~ -5°C, so in order to avoid  frostbite when patient do teratment, please inform them need to control well the treatment time and temperature according to their own physical qualifications.

Lipo laser pads

lipo laser working theory

I lipo laser for fat reduction, use the 650nm soft diode laser to destroy the deep fat cells, broke 

the cell membrane, change the fat to triglyceride, then leave out the body, thanks to metabolism. 

The I lipo laser heat can Stimulate the subcutaneous dermal tissue collagen and elastic fibers 

hyperplasia, make the treated area skin tighten and elasticity

Safe and Painless

Lipo Laser uses low levels of visible red laser light to create a safe and painless bio-stimulation 

effect in the targeted fat tissue. This stimulation is of the normal chemical pathways which the body 

uses to free up energy resources when required, so Lipo laser does not produce any abnormal 

effects in the body or damage body tissue such as cells, blood vessels or neighboring nerves or 

vital organs. 

 The treatment can be performed on all skin types and body areas where unwanted fat is stored and 

you can return to normal activity immediately after treatment.

Application

Intensive physicallipolysis to remove fat

Excess fat cell melted

Body slimming,cellulite reduction

Smooth fatigue

Remove obstruction from channels and collaterals

Promote and accelerate the body’s metabolism 

 Newest CRYO+CAV cryolipolysis system and radio frequency for fat loss and wrinkle removal/anti cellulite machine 

We are Osano beauty equipment factory, have rich experience in beauty quipment industrial, so OEM or ODM ia available, welcome to visit us and if any question please feel free to contact us.