Cable Accessory CEE KQT-24/630 Shielded Fore-Connector

Specifications

1. shielded and insulated termination
2. 630 A, 24kV.
3. EPDM
4. KEMA report
5. cable accessories/cable joints

cable accessories/cable joints 

 

RU KQT-24/630 Shielded Fore-Connector is shielded and insulated termination, rated 630 amps, up to 24kV, connected with underground cable ranging from 35 to 400 mm²(conductor cross section). It meets the requirements of DIN 47636 Standard.

The RU KQT-24/630 Shielded Fore-Connectors are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to switchgear, RMU and 630 amps junctions equipped with deadbreak bushings. Shielded Fore-Connectors are designed for used on solid dielectric cable (XLPE or EPR).In order to provide more cable branch circuits, the Shielded Fore-Connectors can be connected with the RU KHT-24/630 Shielded Sub-Connector or the RU KH-24/630 Shielded type Sub-Connector by connecting plug.

The test point is available for use with hot line voltage indicators. As a alternative application, he Shielded Fore-connector can be mated with the type RU KBLQ-17/45 surge arrester for over-voltage protection

 

Electrical Characteristics:

Voltage Rating and Characteristics
Description	kv
Standard Voltage Class	10
Max Rating Phase to phase	12
Max Phase to ground	42
AC 50 Hz 1 minute Withstand	53
DC 15 minute Withstand	105
BIL and Full Wave Crest	15
Current Ratings and Characteristics
Description	Amperes
Continuous	250A
Switching	10 operations at 200A, 14.4kv
Fault Closure	10kA
Short time	50kA rms symmetrical for 0.3s 20kA rms symmetrical for 4.0s
Electrical Characteristics are in accordance with or exceed GB/T 12706.4-2002, ANSI/IEE 386-1995, IEC 60502-4:1997