Input node DTBIN IP-based Distributed Controlling and Switching System Home AV Solution E-CP2M Programmable Central Control

 Input node DTBIN, IP-based Distributed Controlling and Switching System, Home AV solution, E-CP2M Programmable Central Controller

Input node DTBIN

Input node is for collecting signals and preprocessed data, encoding it into IP streaming, that are to be transmitted over Ethernet. every input node is independent, responsible for collecting and controlling of 1 signal devices. It access to network switch via twisted pair cable.

E-CP2M

1. 32 digits processor;

2. Works with iOS/android/RF touch panel;

3. Programming tool for iOS/android devices is compatible with conventional software;

4. Support network parallel connection, unlimited space expansion;

5. Hundreds of logic module that can implement complex functions;

6. Crystal button with backlighting.

l Transmitting all Audio, video, and RS232 signals simply by twisted pair cable. 

l Distributed structure, no physical central controller required, every output node is independent, greatly reducing the risk of system operation, and maintenance costs.

l Each output node is with one video signal (HDMI,VGA or SDI) input, bi-directional RS232 port, 3 I/O and 1 IR port

l Output resolution supports 800*600 to 1920*1080 60Hz

l Bidirectional RS232 serial port, realtime device status can be collected for testing, responding and implementing the realtime instructions from data center

l Each output node comes with 3 I/O port, all are with 5V voltage output, available to control high current devices by relays. they also access to variety of sensors, collect data and transmit to data center;

l Deploy high performance logical and coding chips, ensure well running of system, and high-fidelity of audio and video signals;

l Streaming data from network switch will be decoded into high quality HDMI,VGA or SDI video signals;

E-CP2M

1. Built-in network interface, support network parallel connection, support for unlimited space expansion, works with iOS/android/RF touch panel;

2. Programming tool for iOS/android devices is compatible with AVCIT’s conventional touch panel software;

3. Programmable tool is with interactive control structure, available to be in English and Chinese version;

4. Highly integrated co-processor chip, with fine layout, enable the system running to be stably and efficient;

5. 8MB RAM and 16MB flash memory;

6. 8 channels independent programmable RS-232 control interface, support data of RS232, RS485, RS422;

7. Data can loop out via serial port, the data, which input to any serial port channel, can be loop out from another serial port;

8. 8 channels independent programmable IR interface, can be serial port as well, therefore serial ports of E-CP2M is up to 16;

9. 8 channels digital I/O input and output port, with protection circuit;

10. 8 channel relay interface, for 5V;

11. 2 AVCIT net interface, available to connect to up to 256 net devices;

12. Customer Programmable any control protocol or control codes;

13. Smart IR learning function modules inside;

14. Supports dual-code control;

15. IR learning function by hardware, customers can replace infrared equipment by themselves without re-programming;

16, Mainstream SMT production technology.

Exhibition hall 

Command center for government/military

Club, ballroom

Smart house

Smart campus

Number of video channel 1 channel

Video specificationHDMI, DVI, VGA, SDI

The maximum levelsT.M.D.S 3.3V

Output levelT.M.D.S 2.9V