Seat Occupancy Sensor Taxi Safty Track
seat occupancy sensor For car/taxi safty track
Touch point sense
Universal for cars,taxis,buses
New type sensor
Occupancy sensor sample is available
Can be used for GPS tracking system,safety belt,any kind of auto seats. The touch point sensor can feel if there is person on the seat or not. Quite useful and most popular sensor.
Performance Parameters Table | |||||
Parameter |
Condition |
Sign |
Numerical Value |
Unit |
|
Min |
Max |
||||
Working Voltage |
U working |
0 |
20 |
V |
|
Working Current |
I Working |
0 |
50 |
mA |
|
Non-trigger resistance value |
No load |
Rx=R No load |
10.0K |
Ω |
|
Trigger resistance value |
Bearing body |
Rx=R Trigger |
0 |
100 |
Ω |
Insulation impedance |
No load |
Rx=R No load |
10 |
20 |
MΩ |
Specification | |||||
Material |
PC |
||||
Material surface thickness |
0.188mm |
||||
Output Signal |
Resistance<100Ω |
||||
Film thickness |
0.5+-0.1mm |
||||
Bottom glue |
PET 3MDouble-sided glue |
||||
Enviroment Temperature |
-15°C-80°C |
||||
Permanence |
>150000 Time |
||||
Pressure range single-spot test(Special Poise) |
70g |
100%non-conducting |
|||
130g |
100%conducting |
||||
Connector |
Seal gum |
||||
To match as the seat | |||||
2.Sample Policy
we do not supply free sample. If you need sample, you should pay for the sample cost and express fee.
For the sample charge, we will refund to you in future order.
3.Attention
A:When you order the seat, please info us the mounting size.
B:we pack by carton, if delivery by LCL, we suggest our customers pack by pallet. And the customers should pay for the pallet.
Normally, one pallet can load 8 or 12 cartons.
FAQ:
1.What is the Minimum Order?
Our minimum quantity is 50pcs.
2.How long is the delivery time?
Normally 15-25 days after get the payment.
3.What is your nearest port?
Ningbo or Shanghai port
4.What is your payment term?
T/T in advance or LC(for big order)
5. How to delivery?
for several piece, you can choose by air
above 20 pcs, you can choose by sea.
6. What about the warranty?
1 year limited warranty
7. How long to prepare a sample ?
For forklift seat, it need about one or two weeks prepare the sample.
For heavy equipment seat with suspension, it need about 20 days.
Send Inquiry to This Supplier
You May Also Like
-
T65 PC ABS Plastic Resin Easy Molding Household Consumer Electronics Raw MaterialUS$ 1.2 - 1.5MOQ: 1 Kilogram
-
SICK ICR845-2E1020 SICK Industrial Barcode Scanner for Logistics & AutomationNegotiableMOQ: 1 Piece
-
DCEC QSL Diesel Engine 4921483 Pressure SensorNegotiableMOQ: 1 Ampere
-
Pressure SensorNegotiableMOQ: 2000 Pieces
-
Sick WSE4S-3P3130H Order Number: 1052888 Product Family: W4S-3 Inox Hygiene Product Family: Photoelectric SensorsUS$ 100 - 200MOQ: 1 Piece
-
20428461 20732304 20428462 Heavy Duty Truck Sensor Parts Fuel Tank Level Sensor For VOLVONegotiableMOQ: 1
-
King Pigeon Temperature Humidity Transducer THI100 Temperature Humidity Detector Wireless SensorUS$ 2 - 31MOQ: 5 Pieces
-
Ultrasonic Position Liquid Level Position SensorUS$ 200 - 700MOQ: 1 Piece
-
Crank Oil Seal for Toyota Auto Parts Oem 90311-95012US$ 1 - 10MOQ: 1 Piece
-
SHT10 Humidity & Temperature SensorUS$ 1 - 2MOQ: 5 Pieces

