SJ-F8 8mm Rgb Pixel Led

Description:

These LEDs are an easy way to add colorful and complex lighting effects to a project. Each RGB LED contains an integrated WS2811 driver that allows it to be controlled with a high-speed one-wire interface (see the bottom of this page for sample code, including an unit board controller library for controlling these LEDs). Multiple LEDs can be connected together to form a chain of RGB LEDs, and the entire chain can be controlled from a single microcontroller pin. These are very similar to the LEDs in our addressable RGB LED strips, but with these discrete LEDs you have far more flexibility in how they are arranged. The picture on the right shows a chain of 10 LEDs in a breadboard controlled by an unit board controller .

Features and specifications

· One-wire digital control interface

· Can form a chain of individually-addressable RGB LEDs

· 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel

· 5 V operating voltage

· Draws approximately 50 mA at 5 V with red, green, and blue at full brightness

· Color ordering: red, green, blue

· code available

About using the LED

Pinout

The LED has 4 pins, 

The pins can be identified by the length of the leads or by looking for the flat side of the LED.

Connecting the LEDs

The DIN pin is the input signal pin. The DIN pin of the first LED in the chain should be connected to an I/O line of a microcontroller.

The 5V pin supplies power to the LED, and should be connected to a suitable 5 V power supply. The power supply should be capable of supplying enough current for all the LEDs it is powering. Each LED draws approximately 50 mA with all three channels at full brightness.

The GND pin should be connected to the ground pin of the microcontroller that is controlling the LEDs and also the negative terminal of the power supply.

The DOUT pin is optional and allows you to chain multiple LEDs together. It can be connected directly to the DIN pin of the next LED in the chain.

Notice: These LEDs can explode if they are pushed beyond their limits. For example, we were able to make an 8 mm LED explode by powering at 6 V and setting it to full brightness for about a minute (though we could not subsequently replicate that result). We strongly recommend you avoid powering these LEDs at voltages over 5 V.

Default Color,

After power is applied to these LEDs, they will emit bright blue light until the first color command is received.

Chaining,

These LEDs can be chained with each other and also with other LED products that have a similar protocol. In particular, they can be chained with any of our WS281x-Based Addressable RGB LEDs. Even though these LEDs use a different color ordering than the WS2812B (RGB instead of GRB), they can still be chained to WS2812B-based products.

 Picture details:

Singal define:

Color change and effect: each led change color individually with controller.

Package: 5pcs/bag, 100pcs/ bag or customer size.

 Services:

1.Reply your inquiry in 24 hours

Shipment:

1.Goods will be delivered within 3-5 working days after the payment received

2.We ship item via DHL, Fedex,UPS,Door to Door service express or air and sea.

Warranty:

1. All products we sell are in good quality and have been tested before they are shipped out

2. We offer 2 years Warranty

Certification :CE&Rohs

ShenZhen Shiji Lighting Co.,Ltd established high-tech firm specialized in the research, development, engineering, and marketing of LED based lighting solutions. We have professional engineers always staying at the forefront of LED technology. We're especially well-placed in the field of  sign lighting solutions and interior lighting We're Located in ShenZhen south of China, near  ShenZhen Airport and HK with convenient transportation Our product range is as follows:

1.5050&3528 LED module Backlight for Channel Letters & signage
2. RGB LED pixel light & LED string light  
3. LED flexible strips & LED rigid bar for Decorative Lighting 
4. High Power LED spot light 
5.LED flood light
6.LED ceiling light
Clients are welcome to buy our standard products, or send us OEM requests. You will be impressed by our quality and service.

If any question,please feel free to contact us.Thank you.

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Need about 3-5 days, mass production time needs 1-2 weeks for order quantity more than.

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.

More information please contact Zoey Tian directly, phone/whatsapp: +86 18280061943