Contact Platform Support
Help CenterSteel Cable With Promotional 304 Stainless Steel Forged Shoulder Eye Bolt
Related Products
-
1.0mm /1.2mm/1.5mm Stainless Cable Tags With HooksUS$ 0.25 - 0.25MOQ: 500 Pieces -
Black Coated Steel Rope With Leaf Bolts And TabsUS$ 0.85 - 0.85MOQ: 500 Pieces
-
High Quality Gym Cable With Shrank Ball TerminalsUS$ 0.68 - 0.68MOQ: 500 Pieces
-
Stainless Steel Cable With Screw Lock Cable TagUS$ 0.3 - 0.3MOQ: 500 Pieces
-
Steel Cable With O Shape Big Terminal for Security UseUS$ 0.8 - 0.8MOQ: 500 Pieces
Steel cable with promotional 304 Stainless Steel Forged Shoulder Eye Bolt
1.size |
M10 or as requirement |
Custom-made available |
2.surface treatment |
stainless |
|
3.material |
304 Stainless |
|
4.MOQ |
1000pcs |
|
| 5.finish color | silver | |
| 6.category | rigging hardware | |
7.Lead time |
7days if there were enough material in stock |
|
8.sample |
Free sample available if all of dimensions same as our existing one ,if not ,contact me ,to get a cost efficient solution. |
|
specification |
Refer to the drawing as below: All of specification custom-made available. the tighter tolerance ,the higher the cost of the cost. |
|
Application:
It is recommended to use shouldered eye bolts for rigging hardware, except when prohibited by the configuration of the item to which the eye bolt is attached. Where non-shouldered eye bolts are required, they shall be used only in vertical pulls or in rigging systems that are designed, analyzed, and approved by a qualified person.
For vertical loading, eye bolts without shoulders have the same load-carrying ability as shouldered eye bolts.
Shoulders of eye bolts shall seat uniformly and snugly against the surface on which they bear. Never undercut eye bolt to seat shoulder against the load. Always countersink receiving hole or use washers to seat shoulder.
When more than one eye bolt is used in conjunction with multiple-leg rigging, spreader bars or lifting beams should be used to eliminate angular loading. In case two or more than two eye bolts are used without spreader bars, their orientation shall be such that load is in the plane of the eyes as shown below (Orientation of eye bolts). When eye bolts cannot be properly seated and aligned with each other, a steel washer or spacer not to exceed one thread pitch may be required to put below the eye bolt. Proper thread engagement must be maintained. Use a washer with approximately the same diameter as the eye bolt shoulder and the smallest inside diameter that will fit the eye bolt shank.
pany profile:
Dongguan City Guofeng Sports Equipment Fitting Co., Ltd is a professional wire assembly manufacture focus on research, development and selling. We can meet our customers' requirements by excellent R&D capability,advanced processing and testing equipment.
Products are mainly used in vehicle internal brakes, stalls, car rearview mirror, fuel pedal, mechanical and electronic drive control system settings. In addition, also be used for general industrial, for supporting, dragging and dropping hoists.
2.Export percentage: 51% - 60%
3.factory information:
factory size:5000.00 square meters
staff number:100-300people
location: the first floor, D Building,NO.10Road. Longyan Industrial Zone, Humen Town, Dongguan City, Guangdong Province, China
production lines:3 lines
R&D:5-10people
QC:5-10people
1. How do you design a pu/pvc coated stainless steel springs ?
Of course ,we have to know your application firstly and a number of factors have to be considered, such as work load, safety abrasion, environment ,cycle life, flexibility, cost, When we design the pu/pvc coated stainless steel springs .
2. How to place an order?
We produce according to customers’ specifications,so you’d better give us complete information as specified below:
Material,Diameter,Construction,Coating,Length,Packing,Quantity, Remarks
3. Are your products of good quality? How can I trust you?
Yes. We are a professional manufacturer of wire assemblies with 15 years producing experience in China .We have always been cooperating with domestic and overseas customers and partners with the first- class quality and service to make great achievements. If this is your first time to contact us, please trust us, we’ll not let you down.
4. What’s the lead time of my order?
It was largely depend on the size of your order .normally ,15days . if you are in urgent need of it ,we will try my best to met your requirement.
If you have any questions else ,please feel free to contact us.
Send Inquiry to This Supplier
You May Also Like
-
Expansion BoltNegotiableMOQ: 1 Piece
-
Stainless Steel 304 ISO 7380 Allen Hex Drive Button Head Machine Thread ScrewUS$ 0.01 - 0.1MOQ: 1000 Pieces
-
High Strength BoltNegotiableMOQ: 2300 Pieces
-
SC-85 Oven Door Lock, Oven Hinge Good PriceNegotiableMOQ: 1
-
Massey Ferguson Tractor Hydraulic Pump StudsNegotiableMOQ: 1
-
Custom Stainless Steel Sleeve for Brass FittingsUS$ 0.2 - 0.2MOQ: 100 Pieces
-
Hexagonal BoltsUS$ 0.5 - 1MOQ: 2000 Pieces
-
Household Hardware Single Wall-mounted HookUS$ 0.12 - 0.13MOQ: 1000 Pieces
-
9PC Number Steel Stamp Set for Hand ToolsUS$ 1 - 30MOQ: 300 Sets
-
JINXIN Glass Balustrades Spigots_frameless Glass Railing Spigot_stainless Steel Pool FenceUS$ 20 - 30MOQ: 50 Pieces
