Beautiful Wall-mounted Security Display Stand for Mobilephone

Specifications

Security  Alarm Display Stand for cell Phones

Operation Steps

1.) Charge for host with power adaptor connected.

    Led indicator turns red when charging and turns off when fully charged.

2.) Turn ON the button at the bottom of the holder.

3.) Write code by pressing on the button on decoder, which should be aligned with Signal receiver hole within 15mm (a prompting sound would be emitted when being written).

4.) Tear off the 3M sticker at the bottom of holder.

5.) Stick the holder on clean desktop (keep pressing for more than 10 seconds).

6.) Plug contactor cable into contactor cable hole of the holder.

7.) Tear off 3M sticker adhesive on connector, to which make the displayed products adhered. (keep pressing for more than 10 seconds)

8.) Tear off 3M sticker adhesive on the small contactor.

9.) Make the small contactor adhered to the front cover.(keep pressing for more than 10 seconds)

The holder emits a “DD” sound and the LED light flashes blue at the interval of 5 seconds when finishes the above 9 steps and the alarm works.

 M035 features