Mobilephone Display Security Stand

1    Connect power adaptor with one of the 2 "DC" ports (Bottom or Side)                                                                 Remark: This step is not necessary when host is fully charged and when you donot want to charge for the cell phone.

2    Turn On the switch on bottom                                                                               

Remark:  "D..D" sound and a red flashing

3    Use the key to match code ( be directed at "purple place" with 10mm and press the key)     

Remark: you can use one/two/three keys to match code with short interval.

 "D..D" sound and a red flashing shows matching code successfully.

4    Clean and dry the table,  then tear off the white sticker on the bottom of host,  then stick M020-01 on table and keep pressing for 10 seconds.

5    Plug micro charge cable into a port (at top side of M020-01).  At the same time, micro USB connecting with your cell phone

6   Tear off the white sticker at top of M020-01, then clean back of cell phone, then place and stick the cell phone on top of M020-01 and keep pressing for 10 seconds.

Remark:  "D..D" sound and a red flashing at the same time