NANPAO tape, stickers and labels hot melt glue with extreme bonding strength

Product Description

 HM-242B is pressure sensitive hot melt adhesive for labels. With great tack and holding power, high peel strength, great heat-resistance performance, excellent resistance to oil-bleeding, HM-242B is suitable for use in tropics.

Technical Data:

Composition:  thermoplastic elastomer

Appearance:  yellow block solid

Toxicity:  none

R&B softening point:  approx. 98°C

Brookfieldviscosity:   

   165℃-------about 7800 mps

   175℃-------about 6200 mps

   185℃-------about 4900 mps

Density:  0.98 g /cm³

Application Instructions:

Its adhesion performance will be affected by substrates, release paper and application environment, so trial run is necessary to determine whether the adhesive is suitable.

There should be no dust or oil on the surface of substrates and release paper, also the substrates and release paper should be treated to constant temperature and humidity before application.

Recommended application temperature: 140-170℃, the viscosity of glue can be adjusted by changing the glue temperature. The application temperature should be adjusted based on the practical use and should be increased in winter and reduced in summer.

Application methods: roller or spray

Packaging and Storage:

Shelf Life: 12 Months in dry and cool environment

Packaging: 25 kg/box, 0.75 kg/cake

Cleaning:

The residual adhesive can be rubbed off by wooden shovel before it is totally cooled.

Cooled glue can be cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120℃, then purged with hot melt adhesive.