Packer for Flex Foam Injection Grout
Specifications
Concrete crack high pressure Injection packer1. hard injection packer
2. inject for epoxy
3. Inject for PU
Injection grouting packers for high pressure injection grouting, high pressure injection packers for building construction
Ruth injection packer for injection machine spare parts is used with the Ruth injection machine in concrete crack repair and water leaking stop. It suits for both polyurethane and epoxy injection.
1. Clean the stains & mark the position of leaking

2. Mechanical Principle - Inclined Inject Method, place one packer every other 30cm alongside the crack
3. Dril where it leaks , burry and lock up the packer.
4. Connect The Injection Packer With Grease Head. The Next Day After Injection, Remove Extravasation.
5. Clean and maintain the injection machine
.
Send Inquiry to This Supplier
You May Also Like
-
CE and ASTM Self Bituminous Adhesive Waterproof Membrane for Roof, Window, Door, Road, Bridge, Ship Deck Anti Corrosion Protection Pipe TapeNegotiableMOQ: 100 Rolls
-
2.0mm Textured HDPE Geomembrane Dual-Sided Friction for Slope ProtectionUS$ 9.5 - 10MOQ: 100 Square Meters
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces




