Multi-parameter Water Quality Meter, PH Meter
Specifications
pH Mode, ORP Mode, Ion Mode, Conductivity/TDS/Salinity Mode, Dissolved Oxygen Mode.Multi-parameter Water Quality Meter, PH meter
- pH Mode:
Up to 5 points push-button calibration with auto-buffer recognition.
selectable pH buffer standards, resolution and temperature units.
Automatically calculates and displays electrode slope that helps you decide whether to replace pH electrode.
- ORP Mode:
Single point offset calibration allows user adjusts displayed value to a known standard.
Absolute or Relative mV measurements provides accurate readings
- Ion Mode:
Standard BNC connector can connects many Ion selective Electrode.
2 to 5 points push-button calibration from low to high concentrations.
selectable multiple concentration units, including ppm, mg/L, mol/L.
Direct readout ion concentration simplifies measurement process.
mV measurement allows user to check performance of ion electrode.
- Conductivity/TDS/Salinity Mode:
Up to 5-point push-button calibration allows user to uses customized calibration solutions.
Adjustable TDS factors, cell constants, temperature coefficients and normalization temperature.
selectable linear or pure water compensation modes.
In salinity measurement modes, selectable practical salinity (PSU) or seawater measurement standard (ppt).
- Dissolved Oxygen Mode:
1 or 2 points auto-calibration (100% in saturated air or air-saturated water, 0% in zero oxygen solution).
Manual salinity and barometric pressure compensation.
selectable readout in ppm, mg/L or percentage saturation.
BK-Bante 900 multi-parameter meter is capable of measuring up to
9 water quality parameters, including pH, ORP, Ion, Conductivity
TDS, Salinity, Resistivity, Dissolved Oxygen, etc.
Parameter
Model |
BK-900 |
pH Range |
-2.000~20.000pH |
pH Accuracy |
±0.002pH |
Resolution |
0.001, 0.01, 0.1pH, selectable |
Ion Concentration Accuracy |
±0.5% Full Scale (Monovalent), ±1% Full Scale (Divalent) |
Calibration Solutions |
0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L |
Conductivity Accuracy |
±0.5% Full Scale |
TDS Accuracy |
±1% Full Scale |
Salinity Measurement Modes |
Practical Salinity (PSU) or Seawater Measurement Standard (ppt) |
Resolution |
0.001, 0.01, 0.1, 1, Automatic |
Temperature Coefficient |
0.0~10.0% per °C |
Cell Constant |
K=0.1, 1, 10, selectable |
Dissolved Oxygen Accuracy |
±0.2mg/L (Calibration and measurement under the conditions of same temperature) |
Accuracy |
±2.0% |
Pressure Correction |
60.0~112.5kPa, 450~850mmHg |
Temperature Compensation |
0~100°C, 32~212°F, Automatic or Manual; DO Mode: 0~50°C, 32~122°F, Automatic |
Output |
USB Communication Interface |
Power Requirements |
DC5V, using AC adapters, 220VAC/50Hz |
LCD Display |
Custom dual-display LCD (130×110mm) |
Dimensions |
210(L)×188(W)×60(H)mm |
Weight |
1.2kg |
Contact: Carry Sang
Send Inquiry to This Supplier
You May Also Like
-
Industrial pH Meter for Wastewater Treatment With IP65 Waterproof DesignNegotiableMOQ: 1 Set
-
PHS-8B Online Auto PH AnalyzerUS$ 258 - 550MOQ: 1 Set
-
New PH-009 IA Pen Type Digital pH Meter Digital Tester Hydro Soil PH Meter Blood PH MeterUS$ 1 - 100MOQ: 100 Pieces
-
Digital PH MeterNegotiableMOQ: 100 Pieces
-
Adhesive Water Checker / Moisture Detection / Single UseUS$ 10 - 20MOQ: 40 Cases
-
Digital Soil ph MetersUS$ 30 - 80MOQ: 5 Pieces
-
SELON510 LAB DIGITAL PH METERSUS$ 565 - 619MOQ: 1 Piece
-
PHS-3D Bench Top Ph MeterNegotiableMOQ: 50 Pieces
-
3 In1 Plant Flowers Soil PH Tester Moisture Light Meter Hydroponics Analyzer NewNegotiableMOQ: 500 Pieces
-
Automatic Electronic PH&ORP Swiming Pool Water Chemical Level ControllerUS$ 450.00 - 500.00MOQ: 1 Set

