Contact Platform Support
Help CenterAutomatic Transfer Switch (ATS)//Generator Power Transfer Switch
Related Products
-
2.5/4/6mm Roll x MC4 Solar Connector Cable Black or Red TUV&UL Approval Power Cable for MC4/MC3 Solar CableUS$ 0.3 - 0.6MOQ: 1 Meter -
2.5mm2 MC4 Solar Connector Cable Black or Red TUV&UL Approval Power Cable for MC4/MC3US$ 0.3 - 0.6MOQ: 1 Meter
-
Cheap PP PG Cable GlandUS$ 0.01 - 1.4MOQ: 1 Piece
-
125x125 Single Crystal Solar Cells 2.6W Full Power Level a High Efficiency DIY Solar PanelsUS$ 1.5 - 2.5MOQ: 50 Pieces
-
1500V DC High Voltage Fuse Cutout Solar PV DC Fuse HolderUS$ 1 - 5MOQ: 50 Pieces
Specifications
1)High quality Automatic Transfer Switch (ATS)2)With CE & CQC Attestation
3)The Most Comparative Price
4)Different selectio.
Automatic Transfer Switch (ATS),power transfer switch,ATS,transfer switch,Power .Changeover Switch
Automatic Transfer Switches are an integral part of the power generation process, allowing smooth and immediate transfer of electrical current between multiple sources and the load. When the generator is operating, the transfer switch prevents dangerous feedback of current to the utility's system. It also ensures that different power sources are fully synchronized before their power is combined or loads are transferred, which is imperative for safe operation
The transfer switch senses when utility power is interrupted, and starts up the generator if the utility power remains absent. In about five to ten seconds, when the generator is producing full power, the transfer switch disconnects the load from the utility and connects it to the generator, restoring electricity to the load. The transfer switch continues to monitor utility power, and when it is restored, switches the load from the generator back to the utility. Once the generator is disconnected, it goes through a cool-down routine and is automatically shut down. ATS size is available from 30 to 3200Amp
Choosing the right ATS for the generator set
1. Generator Set Current: =Genset KVA*1000/Voltage/1.732
2. ATS Size should be 120% of the generator set current /
Features:
1) For emergency power usage in building, auto transfer switch(ATS) is essential.
ATS can auto transfer load from mains power supplying to emergency power
2) When the main power supplying failure or voltage drop below 80% of normal voltage, ATS will auto start emergency generator set after a preset
3) Time of 0 - 10 sec (adjustable according to the users). Once generator reach at Rated speed, the ATS will transfer the load to emergency generator sets automatically.
4) The ATS has large variety current as well as load transform is feasible (20-2500A)..
Send Inquiry to This Supplier
You May Also Like
-
ABB AF75-30-11RT-72 1SBL417010R7211 20-60V DC 3-Pole Contactor for Motor ControlNegotiableMOQ: 1 Piece
-
Circuit BreakerNegotiableMOQ: 2000 Pieces
-
Circuit Breaker MCCB AEG Circuit Breakers(SPQV-63C20)US$ 21.2 - 25.84MOQ: 50 Pieces
-
EZD100E3100N EZD100E Circuit BreakerUS$ 0.1 - 1MOQ: 1 Piece
-
(Circuit Breakers) S201D16 Hot Sales!!NegotiableMOQ: 1 Piece
-
30A Automatic Transfer SwitchUS$ 40 - 60MOQ: 1 Set
-
Rice Cooker Bimetal Disc ThermostatUS$ 0.1 - 1MOQ: 10000 Pieces
-
Reversible Thermo Sensor With Indicator Single-use in Center Part/Temperature Indicating and Recording LabeUS$ 90 - 180MOQ: 40 Cases
-
E-T-A Thermal-Magnetic Overcurrent Circuit BreakersNegotiableMOQ: 1
-
Electric Circuit Breakers Overload Protector Switch OP-01AUS$ 0.1 - 0.3MOQ: 1 Piece
