Si60Ca30/Siliconcalcium/Si58Ca30

Product Introduction of Calcium Silicon:

1. Calcium Silicon is an alloy composed of calcium, silicon, iron and other elements, and widely used and largely produced of iron alloy.

2. Calcium,silicon and oxygen have a strong affinity. Especially calcium, not only has a strong affinity with oxygen and sulfur, nitrogen, but also has very strong affinity. So the Si Ca alloy is a kind of ideal composite deoxidizer and desulfurization agent.

3.With the traits of easy to float, easy to exhaust, it improves the performance of steel, enhances the ductility, impact toughness and flowability of steel. 

4. At present, calcium silicon alloy can replace the aluminum for final deoxidization. 

Advantages

1.CaSi ferroalloy is compound alloy which is composed of silicon,calcium and ferro.

2.It is an ideal compound deoxidizer and desulfurizer which can be used in the production of many kinds of steel such as rail steel,low carbon steel,stainless steel and other special alloy like Ni base alloy and titanium base alloy.

3.CaSi ferroalloy also can be applied as the heatraiser in convertor steelmaking workshop and as the inoculant or additive in producing cast iron and nodular cast.

4.Si and Ca can be controlled absolutely.
5.chalking resistance.
6.slightly less content of other impurities such as C,S,P,Al
7.not easy to be deliquesced

Applications

Absorbent for liquids and gases in industrial processes. 

In road construction 

As a refractory material in industrial furnaces

For the insulation of pipes and conduits, insulation boards

in the manufacture of paints and other types of coating materials

Cosmetics, pharmaceutical products, such as antacids

Fertilizers and insecticides

Photo Display of Calcium Silicon:

Specification

Other information

Calcium Silicon is also utilized in combination with Barium. The Barium increases the density and reduces the vapor pressure of the alloy, thereby improving efficiency. In cast irons it is used mainly by Pipe Shops for the purpose of coating the inside of each mono cast machine.

Calcium Silicon can be obtained in lump or powder form. The most widely used method for intergrated steel applications is in the form of cored wire. This is mainly because calcium has a low density and high reactivity in the ladle making it difficult to introduce and retain in the melt. Cored wire eliminates these variables: CaSi powder is blown deep into the steel melt through immersion of steel tubes.

Certifications: CIQ SGS

Company Introduction:

Located in Anyang,Anyang Xinzheng Metallurgical Materials Co., Ltd was founded in 2003. Our company enjoys a geographically advantaged transportation. The factory covers an area of 12,000 square meters, with registered capital of 6.8 million. The annual sales is 213.815 million, paying tax 13.731 million. It has over 120 employers, of which 30 are senior and professional technicians

Business scope

The main products contain many ferro alloys such as FeSi, SiMn, CaSi, SiAl, NCrFe, SiAlCa, SiAlCaBa, SiBaCaMg, and all kinds of ferro alloy cored wire, as well as refractory materials such as slag fluxing agent, silicon briquette, drainage sand, ladle castable, SiC deoxidizing agent, compound recarburizer and Mn C ball. All specifications can be adjusted according to the customer's demands. 

If you are interested in our products, please do not hesitate to contact us now!