Contact Platform Support
Help CenterHeavy Oil Sludge Waste Treated Management Converting to Fuel Oil Refineries Plant
Related Products
-
Chongqing Mini Small Scale Waste Car Oil to Diesel Fuel Recycling MachineUS$ 90,000 - 450,000MOQ: 1 Set -
JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel MachineUS$ 90,000 - 450,000MOQ: 1 Set
-
Hot Selling China JNC Industry Vacuum Used Hydraulic Oil PurificationUS$ 96,000 - 330,000MOQ: 1 Set
-
Small Scale Continuous Waste Engine Oil Distillation to Diesel and Gasoline Refining MachineUS$ 90,000 - 450,000MOQ: 1 Set
-
Waste Oil Distillation Used Motor Oil Recycling to Diesel Fuel Refining PlantUS$ 90,000 - 450,000MOQ: 1 Set
Be Part Of The Solution
Not The Pollution
⇒ heavy oil sludge waste treated management converting to fuel oil refineries plant
WORKING PROCESS OF heavy oil sludge waste treated management converting to fuel oil refineries plant
JNC heavy oil sludge waste treated management converting to fuel oil refineries plant can be used in different kinds of black engine oil,crude oil,plastic oil and shale oil,to get diesel and gasoline through distilled catalyst.
Pump the waste oil into the heater,and heat it to its working temperature via coal or fuel oil,gas.
The maximum working temperature is about 410 degrees.
The required diesel and gasoline can be obtained after catalytic distillation.
When the reaction of waste oil in reactor is complete,the machine will stop heating automatically,after that we can just remove the residue from the bottom of the tank and then it can be used again.
SYSTEMS OF heavy oil sludge waste treated management converting to fuel oil refineries plant
Reaction tank:waste oil will be pumped into this tank from the primary filter
Heating system: by burning coal or fuel we can work the oil temperature up to setting value.This system equips with insulation system as well.
Catalytic system: waste oil reaches the expected temperature,via catalytic effect,and the gaseous hydrocarbons become gasoline and diesel compositions.
Cooling system: after the catalytic effect,the gasoline and diesel compositions will be condensed into liquid materials.
Temperature control system: to make sure the waste oil transformed into gasoline and diesel.When the waste oil is dried by distillation,it can stop heating timely.
Tail gas handling system: through tail gas system,a small amount of unliquefied gas left can meet emission standards.
OIL RECOVERY OUTPUT RATE AFTER BEING PROCESSED BY heavy oil sludge waste treated management converting to fuel oil refineries plant
Diesel: 86%-88%
Gasoline: 5%-6%
Oil Residue: 6%-8% ( which can be used as bitumen,the raw material for cement and bricks or heating fuel just as coal after being cooled off to normal temperature)
REFINED OIL COMING OUT AFTER BEING PROCESSED THROUGH heavy oil sludge waste treated management converting to fuel oil refineries plant
MAIN BENEFITS AND ADVANTAGES OF heavy oil sludge waste treated management converting to fuel oil refineries plant
1 Working principle: waste oil under the action of catalyst distillation gets high quality diesel directly.
2 No need of acid,alkali,oractivated clay to refine the final diesel, just use our plate-and-frame filter( carried with JNC) to remove the impurities.
3 The operating method of JNC heavy oil sludge waste treated management converting to fuel oil refineries plant is directly heating with fuel or gas, which is safe, convenient,and practical.
4 Environmental friendly: It is completly sealed while running JNC heavy oil sludge waste treated management converting to fuel oil refineries plant so it wouldn't release any harmful gas to human and the environment.
4 The total cost of processing used oil is only USD19 per ton (including fuel, electricity and catalyst cost).
5 High oil recovery rate: diesel 86%~88%gasoline 5~6%,oil residue 6~8%.
6 Different from other equipment on the market: JNC heavy oil sludge waste treated management converting to fuel oil refineries plant uses a special way of heating with high thermal efficiency so that it doesn’t form carbon deposition easily, which greatly reduces your maintenance costs.
7 Currently on the market, the distillation is based on coil heating, due to the temperature which can’t meet the technical requirements, the oil yield only achieve to 65%.
This kind of heating mode will make it easy to scale. More importantly, it needs high temperature pump which is expensive and easily breakable. These weaknesses mean you need high cost of frequent replacement after.
8 JNC heavy oil sludge waste treated management converting to fuel oil refineries plant is safe to operate, reliable and very durable. And it’s easy to operate and low on labor intensity, only 1 to 2 workers are enough to make the machine work.
Wooden Case Nude Packing
(Actual Size Depends On The Daily Capacity Of JNC heavy oil sludge waste treated management converting to fuel oil refineries plant)
Send Inquiry to This Supplier
You May Also Like
-
Equipment Distilling Equipment Machine Small Essential Oil Extractor Extraction Distiller DistillationNegotiableMOQ: 1 Set
-
Waste Oil Gas Burner in JinzhenUS$ 300 - 900MOQ: 1 Unit
-
2015 Waste Oil Converting to Diesel Plant Changing Color From Black to YellowUS$ 60,000 - 90,000MOQ: 1 Set
-
High Efficiency Low Cost Automatic Deep Fryer Oil Filter MachineUS$ 1 - 1,000MOQ: 1 Set
-
Two Guns Two Oil Type Double Measurement Double Display Refuelling MachineUS$ 1,464 - 1,805MOQ: 1 Piece
-
2016 New Design Oil PurifierUS$ 1 - 1,999MOQ: 1 Set
-
Engine Oil Regeneration System(Used Oil Purifier,Oil Filtration,Oil Separator,Oil Filter,Oil CleanerUS$ 6,000 - 500,000MOQ: 1 Set
-
Automatic Vacuum Waste Transformer Oil PurifierNegotiableMOQ: 1 Set
-
TLY Type Portable Oil Purifier by Manfre ManufacturereUS$ 1,800 - 2,500MOQ: 1 Piece
-
Oil Water SeparatorUS$ 40 - 50MOQ: 10 Pieces
