industrial wood chipper machine price

industrial wood chipper machine price

1. Brief Introduction of industrial wood chipper machine price :

It's mainly used in pulp and paper mill. This wood chipper cut logs into wood chipps, of high quality, consistent length and consistent width. Wood chipps specification is generally: 15-20mm length, 3-5mm width. Wood chipps length can be adjusted by adjusting the gap zise of bottom knives.

2. Application of industrial wood chipper machine price :

They are widely used in wood processing factory and straw cutting factory, and also provide materials for edible fungus cultivation base, particle board making factory, etc.

Disc wood chipper mchine/drum wood chipper/pto wood chipper/wood chipping machine are used for cutting logs,branches,slab,waste veneer,bamboo,cotton,stalks and other non-wood fibre stems into dimensional chips which are the essential material for the production of particle board and paper pulp.

3. Technical Parameters of industrial wood chipper machine price :

industrial wood chipper machine price is the ideal equipment for making perfect wood chips, logs and small wood can be cut into high quality with even length and uniform chip thickness. . Industrial wood drum chipper wood logs, branches and twigs with moisture more than 15% into 20mm-40mm wood chips for various wood products industries and plants. it also can be called wood cutting machine, it is widely used in particleboard mill, medium or high-density fiberboard factory, biomass power plant, wood pellet plants and other industrial production factories.

Industrial wood chipper machine price is made up of machine body, knife roller, the upper and lower feed roller, conveyor belt, hydraulic system.it adopts high strength steel plate welded together, is the supporting basis of the whole machine.Install two or three, four flying knives in the knife roller. Using the fly-knife bolt specially manufactured to fix these fly-knives on the knife roller through the pressure block. According to different thickness of cutting materials, the upper feed roller can fluctuate within a certain range with the aid of hydraulic system. Qualified wood chips fall down through the sieve holes, and are discharged from the bottom; large wood chips will be cut again within the machine.