LED Warning Baton

LED Warning Baton

LED Powerflare:
This compact (4″) light emits 360° Of ultra-bright light from an array of 16 LEDs, visible for up to 10 miles away. It is waterproof and so tough, you can run it over with a tank!
Unlike flashlights with alkaline batteries or chemical light sticks, units can handle extreme temperatures and extreme situations (intrinsically safe), and feature an impressive 10 year storage/shelf life, using lithium batteries that won’t ever leak. This same technology used by first responders and the military is now available for you and your family.

With a Electronic Beacon motorcyclists can gain the following benefits:
Superior Visibility: Super-bright LED array can be seen for miles at night, but is bright enough to provide you extra protection during the day, as well.
360° Coverage: Units clipped to seats, saddlebags or backpacks can provide 360° Coverage. Lateral illumination, a common weakness of other emergency lights, is provided.

Versatile: Units can be used for traffic control, as a warning light, as a rescue beacon, and so on. Because they are watertight and non-reactive, they can be used in places where old-fashioned flares would be dangerous, such as in dry brush or in the presence of gasoline. And who really wants to carry an old-fashoned burning flare on your motorcycle!?
Plus, you can use them while hiking, rollerblading, and many other sports and activities.

Flash Patterns
(User-Selectable)
Max. Run Times,
Continuous
Flash Pattern
Solid-On High: 8 hours
Rotate: 15 hours
Alternate: 10 hours
Quad-Blink: 15 hours
Double-Blink: 30 hours
Fast-Blink: 12 hours
Slow-Blink: 100 hours
Solid-On Low: 60 hours
“S-O-S”: 24 hours
Shock, vibration, and water-resistance.
ON: Just press the switch button;
OFF: Press the switch button for a while.

Flare Baton:
Detailed Product Description
Emergency led baton road flare police equipment signal flare magnet Multi-functional roadway powerful magnet
led traffic signal
Emergency traffic warning light led baton road flare police equipment
OPERATION
Press the ON/OFF BUTTON on each flare to rotate through the following 6 light patterns:

Alternate Operation:

Step of charging:
1> Put the light on ground, back side is upturned.
2> Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.
3> Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug.
4> If you want to charger the light through AC, please connect the AC charger.
5> If you want to charger the light through CAR Plug, take out the AC charger and connect the CAR charger instead.
*** When it is succeed charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED.
LI battery in recharge series capacity: 700mAH/3.7V
AC charger: input voltage 100-240V, output voltage: 5.5V, out put electricity 450MA
Car charger: input voltage 12-24V, output voltage: 5.5V, output electricity 450MA
Charging time: battery can be fully charged within 2-3 hours.