BD-V200 E-light IPL hair removal machine

Specifications

BD-V200 E-light IPL hair removal machine

Brief Introduction
IPL (Intense Pulsed Light) is a kind of light with high energy and broad wavelength, within the range from 530nm to 1200nm. Photothermic and photochemical action will be triggered by the radiation of IPL. On one hand, IPL will promote collagen reproducing and recombining which makes the skin more flexible and smooth. On the other hand, the light with long wavelength can easily pass through epidermis layer and will be absorbed selectively in priority by pathological pigments which will be destroyed by high heat, and get the effect of remove pigmentations, vascular lesions and unwanted hair.

1.Principle
Photothermolysis effect: As the pigmentation contents ofthe pathological tissue are much higher than normal skin tissues, after absorbing of the IPL, the temperature of them are higher than normal skin, then the pathological pigmentation or vascular tissues are destroyed without hurting normal skin. 
Biostimulation effect: IPL energy stimulates the collagen to reproduce and recombine , enhance getting the effect of lightening, rejuvenation, tightening pores and removing wrinkle.

 2. Application:
1. Hair removal;
2. Skin rejuvenation.
3. Pigmentation, freckle;
4. Vascular, red face, red capillary, and bottle nose.  

3. System Self-checking

The circuit of system entering the self-checking situation when the machine starts, leave the machine carry on the self-checking for 5-10 seconds, then continue the operation.

4. System Classification

Electric shock protection:Grade1   BF Grade

Corrosion prevention liquid:ordinary

Do not use the machine in the environment mixed of flammable narcotic and air or nitrogen oxide mixture.

5. Equipment Consist, Specification, & Accessory List

1. Equipment Consist:

1.1. Mainframe

A. Power supply system

B. Microcomputer system

C. Monitor

D. Cooling System

1.2. IPLHandpiece

A. Intense pulsed light source, xenon lamp

B. Reflector and filter

C. Sapphire wave guide

2. Technique Specification

Safety protection: Impedance test

Spot size: 8×40mm2

N.W.: 30kg

Dimension: 440mm×510mm×485mm

Voltage: 230V±10%, 50~60Hz

Accessory List