High Effiency Carbon Steel SYT Screw conveyor Machine For Construction with Perfect Design

 High Effiency Carbon Steel SYT Screw conveyor Machine For Construction with Perfect Design

Description
Screw conveyor made ISO9001 standard, design and manufacture accord with ZBJ81005.1 ~ 2-88 LS screw conveyor professional standards. Type LS screw conveyor diameter from 100 mm to 1250 mm, a total of 12 kinds of specifications, can be divided into single and double drive two forms, single drive screw machine maximum length can reach 40 m (oversize 30 m), double drive screw machine with middle shaft structure, the maximum length of 80 m (oversize 60 m), every 0.5 m a spiral captain degrees, can be selected according to need, bearing, the tail bearing under the external screw head department to reduce the dust of the invasion of the bearing chamber improves the service life of screw machine key-module. Suspension bearing adopts rolling, sliding interchangeable among two kinds of structure,small resistance, sealing strong, good wear resistance. Sliding bearing shell powder metallurgy, nylon and babbitt and so on the many kinds of material selection for user according to different occasions. Lateral suspension bearing machine type oil cup, to facilitate centralized lubrication. Front-rear mouth position arranged flexibly, and adding type electric discharging mouth, convenient automatic control, can also according to user requirements, speed alarm device.

Application
Screw machine has been widely used in various departments of the national economy, such as building material, metallurgy, chemical industry, electric power, coal, machinery, light industry, food and the food industry, is suitable for conveying powder, granulated and small lump materials, such as cement, coal, grain, chemical fertilizer, ash, sand, coke, etc. Should not be transporting perishable materials, big viscosity, easy to agglomerate, LS screw conveyor working environment temperature is usually - 20 ~ 40 ℃, the temperature of the conveying material is commonly - 20 ~ 80 ℃, the LS screw conveyor is suitable for level and layout of the small Angle, inclination Angle with no more than 15 ° advisable, such as Angle is too large, please choose GX series screw conveyor, or contact our 
Technical parameter