Home > Products > Color Steel Roof and Wall Roll Forming Machine > Botou supplier hydraulic automatic 470 seam lock roof sheet roll forming machine
Botou supplier hydraulic automatic 470 seam lock roof sheet roll forming machine
- 30 Set / Sets per Month
- Tianjin
- T/T L/C D/P D/A Credit Card PayPal
- Power module Positive + Negative Electric Board Card for Thermatool High Frequency Welder
- Spiral Welded Pipe Tube Machine Line
- HF Welded Carbon Steel Furniture Pipe Making Machine
- Carbon Steel GI ERW Profile Shape Making Machine
- Black Tube Former Machinery HF Square Pipe Forming Machine
- HF Welded Straight Seam Metal Tube Production Line
Product Details
Condition: | New | Type: | Cold Rolling Mill | Brand Name: | TG |
Model Number: | TG-t | Voltage: | 380V | Power(W): | 7.5KW |
Dimension(L*W*H): | 9000mmx1200mmx1200mm | Weight: | 7 T | Certification: | ISO |
Warranty: | 1 Year | After-sales Service Provided: | Engineers available to service machinery overseas |
Product Description
Equipment Description
1. Equipment technical specification
Description | ||
Product Name | Roof and Wall Rool Forming Machine | |
Machine Size | 6800mm*1300mm*1200mm | |
Machine Weight | About 3 T | |
Frame Materials | 350H steel | |
Middle plate thickness | 12mm | |
Forming Shaft | Diameter | 70mm |
Material | 40r quenched and tempered material | |
Forming roller | Cr12 | |
Drive mode | 6 points sprocket, chain / 1 inch sprocket, chain | |
Main Engine power | 4 KW with cycloidal reducer | |
Forming Rows | 13 rows | |
Forming Speed | 8-12m/min | |
Pressing Thickness | 0.2-0.7mm | |
Pressing width | 1000mm | |
Automatic Control | Yes | |
Pump Station Motor | 3KW | |
Computer | Taiwan “Delta” | |
Coder | Wuxi "rip" or "Xin Ya" | |
Switch | " CHINT "or" delixi" |
Equipment for Reference:
2. More details
(1) Hydraulic Ue-coiler
Un-power: manual de-coiler; Max. Capacity: 7T
Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm
Manual power expands the coil inner surface.
(2) Hydraulic Cutting
1) Adopts post cutting, Stop to cut;
2) The cutting blade material is Cr12 with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.
(3) Hydraulic station
1) It supplies the power for the hydraulic cutter.
2) All hydraulic accessories are all use Chinese famous brand products.
4) Hydraulic motor power: 3KW
(4) PLC Control System
1) This system uses Delta PLC to control the all working actions. Production quantity and each piece length will be automatically measured. It is convenient to control the roll forming machine.
2) Delta converter adjusts speed technology, realize the automatic production.
3) Text screen is input and cancelled the working data.
4) Friendly man-machine interface system can be set batches to the work piece, length, quantity, etc.
5) Encoder count, having function of count and measuring length.
6) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement)
3. Company Information:
4. Payment terms and after-sale service:
1) FOB Tianjin
2) Payment: 30% T/T deposit, and pay the balance before shipping.
3) Delivery time: 30 working days.
4) Guarantee period: 12 months limited warranty starting from date of delivery. Shipping cost for parts to be replaced during warranty period have to be borne by the customer.
5) Spare parts: bearings, buttons, chains, magnetic valve, protective tube etc.
6) Installation and training:
1. If buyers visit our factory and check the machine, we will teach you how to install and us the machine, and also train your workers/technician face to face.
2. Without visiting, we will send you user manual and CD to teach you to install and operate.
3. COST OF INSTALLATION:
The buyer should pay the installation charges (USD 80 one man one day). To the seller’s appointed account by T/T before the seller’s technicians go to the buyer’s factory. The buyer pays the seller’s technicians travel cost outside China, including round air tickets fee, accommodation and food, provide transportation from living hotel to the work place, necessary communication, and insurance, etc.
If you have any further question of our equipment, please feel free to contact me, thanks!
Contact Us
- Hebei Taigong Roll Forming Machinery Co., Ltd.
- Contact nameElva Zhang
- Phone86-317-8179009
- AddressZhangsanjia Village, Ind. Zone, Botou
- GT-TH204 Automatic High Frequency Anneal Machine MGO Filling Heater Supplier Professional Factory
- GT-ATH201Auto Anneal machine Heater Emements Equipment
- GT-ATH201Auto Anneal machine
- 2024 GREATER GT-TH202 35 KW Annealing Machine (With Shower Cooling) MGO Heater Production
- Roll Dies for Making Square Steel Pipe
- GT-JY16 16 station shrinking machine
- Fully automatic C-shaped steel forming machine
- Roller shutter door forming machine production line
- GT-TH203 Partial Short Circuit Annealing Machine Heater anneal equipment
- GT-JY12 12 Station Roll Reducing Machine heater reducing equipment for electric heating element
- Stainless steel narrow strip 4 high mill
- 6 high mill China manufacturer-Glimpse Technology
Popular Searches
- looper
- rolling mill
- hot rolling mill
- rebar production line
- steel bar rolling machine
- cold rolling mills
- rebar rolling mill
- Steel Rolling Mill
- Rebar Steel Rolling Mill
- Rolling Mill Machine
- steel billet production plant
- copper rod rolling mill
- cold rolling mill
- price of steel rolling mill
- wire roller
- profile rolling machine
Recommended Products
- Industrial Ethernet Switches RS20-2400T1T1SDAEHC RS20-1600T1T1SDAPHC RS20-1600T1T1SDAPHC RS20-1600T1T1SDAEHC RS20-1600T1T1SDAEHC Rail Switches RS20-0800T1T1SDAPHC RS20-0800T1T1SDAPHC RS20-0800T1T1SDAEHC RS20-0800T1T1SDAEHC Hirschmann RS20-0400T1T1SDAPHC
- Rail Switches RS20-0400T1T1SDAP RS20-0400T1T1SDAP RS20-0400T1T1SDAE RS20-0400T1T1SDAE RS20-0400S2S2SDAE RS20-0400S2T1SDAE
- MS20-0800ECCP Industrial Ethernet Switches MS20-0800ECCP MS20-0800SAAP MS20-0800SAAP MS20-0800SAAE MS20-0800SAAE MS20-1600SAAPHC MS20-1600SAAPHC Rail Switches MS20-1600SAAEHC MS20-1600SAAEHC MS20-0800SAAPHC MS20-0800SAAPHC MS20-0800SAAEHC
- 3NB9/1.8-7.5 mining mud pump is used for providing cooling and flushing fluid during rock core or coal seam drilling
- 2NB3/1.5-2.2 mining mud pump is a vertical, double cylinder, single acting plunger pump
- 5 ton/10 ton/20 ton/30ton QDY Double girder ladle steel making foundry bridge crane
- YXS-05 8 Rows Seeding Machine (Grass Seed) for Dryland Sowing Fertilizing
- YXS-07 8/12 Rows Rice Direct Seeding Machine for Paddy Land Planting
- 12 Rows 600L Pneumatic Seeder for Seeds Fertilizer Sowing and Fertilizing
- 8 Rows 350L Pneumatic Seeder for Rice Wheat Soybean Seeding and Fertilizing
- 12 Rows 100L Pneumatic Seeder for Rice Wheat Sowing and Fertilizing
- 12 Rows 300L Pneumatic Seeder for Rice Wheat Sowing and Fertilizing
Find Similar Products By Category
- Machinery > Metal & Metallurgy Machinery > Rolling Mill
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Elva Zhang
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-