1 micron 10 inch PP Pleated Filter Element for Mineral Water Filtration

PP Membrane pleated Filter cartridge

A. Constructed of all polypropylene high purity media,meets FDA requirements.

B. Multiple layered micro-porous construction ensures consistent filtration performance.

C. No adhesive,thermal bonded manufacturing enable the smallest contaminant extraction and high durability.

D. Wide selection of micron rating to meet different filtration requirement.

E. High surface area 

F. Wide selection of micron rating to meet different  filtration requirement 

G. Increased dirt holding capacity.Longer service life 

Applications

A. Pre-filtration or RO system,DI water

B. Solvents,selected acids&lyes,chemical industry

C. Semiconductor,Eletronic industry ultrapure water system

D. FOOD and beverage,drinking water treatment

E. Oil industry

Material Of Construction

A. Media:Polypropylene

B. Support layer:Polypropylene

C. Core/Cage/End adaptor:Polypropylene

D. Sealing method:Thermal bonding

 Recommended Operating  Conditions

 A. Max.Differential pressure:

 B. Forward-75psi (5.1bar) at 25℃

 C. Forward-25psi (1.7bar) at 80℃

 D.Reverse-30psi (2.0bar) at 25℃

E. Filters change recommended at 1.5-2.0bar

F. Max.Operating temperature:80℃

G. Sterilization:5times,20Minutes cycles at 121℃

Cartridge Dimensions

A. Filtration Area:0.65M2 each 10″length

B. Outer Diameter:69mm

C. Nominal Length:5″,10″,20″,30″,40″etc

D. Micron Rating:0.1,0.2,0.45,0.65,1,3,5…µm