Contact Platform Support
Help CenterProfessional Manufacturer of Plastic Packing
Related Products
-
Jiamu Packaging Design Plastic Box for Underwear PackagingNegotiableMOQ: 10000 Pieces -
Hot Plastic PS Crystal Box for MP3US$ 0.2 - 1MOQ: 100 Pieces
-
Hot Plastic Cell Phone Case Packing BoxUS$ 0.12 - 15MOQ: 5000 Pieces
-
Wholesale Plastic Packaging Box for Cell Phone CaseUS$ 0.08 - 0.35MOQ: 5000 Pieces
-
Hard Plastic Packing Box for Move PowerUS$ 0.1 - 0.3MOQ: 10000 Pieces
Specifications
Professional manufacturer of plastic packing10 years' packing experience
Pass the ISO9001-2000
Direct factory manufacturer
A.About all the material types we use:
1.PVC:a.Advantages:the cheapest and very commen material.Very easy to be sealed by heat sealing machine and high frequency.
b.Disadvantage:not environmental and nonflammable.Once flambe,it will produce chloration,what will do bad to the environment.
2.PS:a.Advantage:very easy to be vacuum thermoformed and it is environmental material.Always molded into trays,including flocky trays.Widely used in electron,medical,food,cosmetic,hardware and so on.
b.Disadvantage:relatively speaking,it is a bit fragile and easy to be torn off.
3.PP:high melting point and can be microwaveable.Widely used in food packaging.
4.PET:PET has two types,one is APET,the other is PETG.Both have high transparency and are environmental material.APET could not be sealed by machine but PETG can.
B.About our service flow:
1.Offer:Quotation will be offered after you inform us the spec. of the packaging,such as the size and material you require.Or kindly send us the real sample for exact price directly.If possible,pls advise the qty as well!
2.Design:If you have no design for the packaging,we offer free design and time is 2-3 days
3.Hand-made samples time:2-3 days
Note:We usually make samples by hand-made gesso molds.The advantage is short lead time and low cost.But the surface will be a bit rough and not so transparent as by copper molds or other molds.
4.Bulk production lead-time:8-12 days (QTY at 100,000pcs)
Note:We have to make copper molds or aluminum molds in bulk production.The lead time of copper molds is usually 3-5 days and aluminum molds will be 1-2 days more than copper molds.The cost of copper molds is affordable but aluminum molds cost will be much higher.It always used for high precision products or very large order qty products.Of course the quality produced by aluminum molds will be better than copper molds.The transparency also will be higher.
5.Price terms:FOB Shenzhen Yantian or CNF.
6.Terms of payment:T/T(40%+60%) or L/C at sight,even O/A PAYPAL for small amount
Any question,pls do not hesitate to contact us.Thanks for your attention!
Send Inquiry to This Supplier
You May Also Like
-
POM Granules DuPont 100P Low Friction Wear‑Resistant for Precision Mechanical PartsUS$ 1.1 - 1.2MOQ: 1 Kilogram
-
PVC UV Panel With Marble, Stone, Granite Etc. Pattern Glossy Surface Perfect Wall Panels for Home and OfficeNegotiableMOQ: 100 Pieces
-
Plastic Sheet, Board & PanelNegotiableMOQ: 2500 Pieces
-
Elastomeric Rubber Foam Insulation Sheet for Refrigeration Systems and Thermal PipingNegotiableMOQ: 500 Square Meters
-
Polypropylene Retort Plastic Separator SheetsUS$ 11.50MOQ: 10 Sheets
-
Plastic Tube Steel Security Half Round Fence Post CapsUS$ 0.09 - 0.31MOQ: 1 Piece
-
Retort Separator PP Sheets With Factory PriceNegotiableMOQ: 1
-
Super Clear Transparent Door Colourful PVC Strip Curtain Rolls PVC Door CurtainNegotiableMOQ: 1
-
SANHONG OEM WHOLE SALE Closed Cell pe FoamUS$ 130 - 142MOQ: 28 Cubic Meters
-
20s/6 100% Polyester Silicone Treated Bag Closing Thread 200gNegotiableMOQ: 100 Cartons
