Contact Platform Support
Help CenterQuikrete Walk Maker-DIY Your Garden and Pave Ways
Related Products
-
DIY Plastic Mould/home DIY Concrete MoldUS$ 4.5 - 6MOQ: 500 Pieces -
Good Quality New Design Garden Path Plastic Moulds Paving StoneUS$ 7 - 8MOQ: 100 Pieces
-
Hot Selling Low Price DIY Precast Concrete Mold for Plastic InjectionUS$ 7 - 8MOQ: 100 Pieces
-
Durable pp Material Concrete Plastic Paver MoldsUS$ 7 - 8MOQ: 100 Pieces
-
Durable pp Material Concrete Plastic Paver MoldsUS$ 7 - 8MOQ: 100 Pieces
garden pathwalk mould to DIY garden
This pavement mold is designed for the garden-lovers, who want to create their own design decoration to make their gardens more beautiful, to give your pavements and yard some artistic sense.
Made of original PP plastic, with size of 500X500X45mm, this mold is reusable more than 2000 times. just need a mixer, a trowel and this mold, you can create your own design of your garden. Because all four sides of this mold can abut to another side, with this mold, it is easy to make a straight path, make a corner, make a patio, and make a curve.
Now this mold is very popular in USA, Canada, Thailand, Malaysia, Germany,UK, Italy and Finland etc.
The working process showing:
How to use this Pavement Mold to build the pathways:
7 EASY STEPS
1. GETTING STARTED
All you need is:
ODJOB Mixer
ODJOB PathMate
Pre-Mixed Concrete
Water
Trowel
2. PREPARATION
The PathMate can be used on any relatively flat surface. You will get the best results by clearing any sod and leveling your working surface first. Plan out your job and then set your PathMate where you want to start.
3. MIXING CONCRETE
Each PathMate mould requires one 60 pound bag of concrete. Add 3 quarts of water to the ODJOB mixer (two capfuls),add the bag of pre-mix, seal the lid and roll for 30 seconds. If you require more water, add one-half cup at a time until you have a consistent mix.
4. FILLING THE MOULD
When your concretes is mixed, simply pour directly from the ODJOB mixer into the PathMate cavities. Fill the cavities you want to use and then smooth the surface with a trowel.
5. REMOVING THE MOULD
Let the concrete set for about one minute before removing the mould. Then give the mould a slight shimmy or twist and lift the mould clear of the concrete.
6. FINSHING TOUCHES
After removing the mould, smooth the edges with a trowel. You can create a variety of finishing surfaces with your trowel, or you can sprinkle on some sand to provide texture. If you want to colour the stones, simply add cement dye during the mixing process.
7. FILLING IN
You can sweep sand or soil into the spaces to fill the gaps or to permit grass to grow between the stones.
The product showing
we are Zhengzhou LYA machinery company, from China, and our company specialized in producing PP,ABS, PVC & Rubber moulds,widely used in the street & driveway pavement, villa ,Park, garden decoration etc.
any question, pls do not hesitate to contact me. Besides, catalogue is available by email attachment, and also sample is available. Thank YOU!!!
Send Inquiry to This Supplier
You May Also Like
-
POM Granules DuPont 100P Low Friction Wear‑Resistant for Precision Mechanical PartsUS$ 1.1 - 1.2MOQ: 1 Kilogram
-
Elastomeric Rubber Foam Insulation Sheet for Refrigeration Systems and Thermal PipingNegotiableMOQ: 500 Square Meters
-
Quality PVC Interior Ceiling Panel Modern Design Fireproof Perforated Ceilings Easy Installation With Ceiling GridNegotiableMOQ: 1000 Square Meters
-
Plastic Sheet, Board & PanelNegotiableMOQ: 2500 Pieces
-
Polypropylene Retort Plastic Separator SheetsUS$ 11.50MOQ: 10 Sheets
-
Plastic Tube Steel Security Half Round Fence Post CapsUS$ 0.09 - 0.31MOQ: 1 Piece
-
4mm PP Corrugated Plastic Sign Panels – Customizable Outdoor DisplayNegotiableMOQ: 3000 Pieces
-
Factory Wholesale Supply Rain Water Drainage Plastic Pvc Rain Gutter Cover Roof Anti Leaf Rain Gutter GuardUS$ 1.53 - 1.74MOQ: 3000 Pieces
-
Retort Separator PP Sheets With Factory PriceNegotiableMOQ: 1
-
Super Clear Transparent Door Colourful PVC Strip Curtain Rolls PVC Door CurtainNegotiableMOQ: 1
