High pressure Aluminum zinc alloy as raw materials for die casting

Specifications

High pressure Aluminum zinc alloy as raw materials for die casting is the process where molten metal is injected into a mold under high pressure in the range of 10 – 210 Mpa. This will result in a highly uniform casting with very good surface finish and exceptional dimensional accuracy. Usually this can either eliminate or greatly reduce the machining required to finish the part. There are two main processes in alloy steel die casting:

 1. Cold chamber process:

Metal is ladled into the injection chamber for each shot. There is less exposure of the molten metal to the chamber walls and plunger. This is very useful for aluminum and copper alloys that would easily alloy with iron at elevated temperatures.

2.  Hot chamber process:

It has the injection chamber which is connected to the die cavity permanently immersed in the molten metal. The hot chamber process is used for metals of low melting point and high fluidity such as tin and zinc.

_______________________________________________________________________________________

Products 

___________________________________________________________________________

Equipment 

——————————————————————————————————————————————————

Testing equipment 

__________________________________________________________________________________________

Manufacture Capability

______________________________________________________________________________________

International businessmen

______________________________________________________________________________________

International Certification

______________________________________________________________________________________________

Location