Contact Platform Support
Help CenterFire Extinguisher Stainless Steel Powder Filler GFM16-1
Related Products
-
Fire Extinguisher Nitrogen Filler/Fire Extinguisher Nitrogen Filling MachineUS$ 10 - 15MOQ: 1 Set -
Peeler(Hot Sell)US$ 450 - 450MOQ: 1 Unit
-
Tube Cutter Machine(Hot Sell)NegotiableMOQ: 1 Unit
-
(Hot Sell)Tube Cutter(DM300)NegotiableMOQ: 1 Unit
-
XBY Fire Extinguisher Check Device/Fire Extinguisher Calibration InstrumentUS$ 500 - 800MOQ: 1 Unit
Specifications
Fire extinguisher stainless steel powder filler GFM16-1It is especially suitable for the filling, production and maintenance
Fire extinguisher stainless steel powder filler GFM16-1is a new product developed by our factory after absorbing the advantages of powder fillers at home and abroad. It can quickly suck dry powder into the cylinder and be directly filled in the container by vacuum fluidics, and it can also conduct sucking and filling simultaneously. It features small volume, easy movement, simple operation and lack of environmental pollution. Thus labor intensity is decreased and work environment is improved.
GFM powder filler (patent number:ZL01275908.2)
is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with T3806 weight display of high precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. So it is specially suitable for powder filling of fire extinguisher and also ideal for other powder filling sector.
Main Technical Parameters
Volume: Length ×Width ×Height (1130mm×520mm×1350mm)
Weight: 200kg
Voltage: AC 380v/220v 50Hz
Power: 0.55KW
Filling precision: 1kg≤+0.15
Filling speed: 6-12kg/min
Use and Application
Use:
In GFM powder filler, Y series motor of 0.55 KW is used as motive power to drive 2X vacuum pump, which can both satisfy the powder filling requirements of various fire extinguishers and suck powder out of the cylinder of the used extinguisher (refer to Figure 2). The filler adopts the filling method integrating speed and accuracy. Two filling modes, namely, continuous and operating are available, which are fit for manufacturers.
Operation for use:
1. Pipeline connection
First have the powder suction pipe (Figure 1-15) properly connected to conical powder storage bucket in the warehouse (The conicity of the powder storage bucket is usually 3:2 according to Figure 2 and the user may determine its size in terms of the production capacity at its discretion). Then check if the connection pipes are loose.
VI. Possible Faults and Their Removal
Symptoms |
Troubles |
Corrections |
Motor doesn’t run after energization |
Leakage protector is off |
Check if leakage occurs and energized after removal |
Fuse is open or loose |
Replace and tighten |
|
Heat relay is open |
Check if damage occurs and reset by pressing the reset button |
|
Contactor is broken |
Repair or replace |
|
Control circuit is cut off |
Properly connected |
VII. Maintenance
1. No impurities are allowed in the powder being sucked by the suction pipe;
2. No powder in excess of the moisture percentage specified and corrosive powder shall be used to prevent equipment from being damaged;
VIII. Packing List
Serial No. |
Name |
Size |
Quantity |
Unit |
1 |
Powder filler |
GFM |
1 |
Unit |
2 |
Electronic scale bench |
T3806 |
1 |
Unit |
3 |
End cap for filling |
120mm |
1 |
Piece |
4 |
Suction pipe |
15mm |
4 |
Meter |
5 |
Valve |
65mm |
1 |
Piece |
6 |
Discharge outlet |
|
1 |
Piece |
7 |
Rubber gasket |
65mm |
2 |
Piece |
8 |
Plain rubber gasket |
25mm |
5 |
Piece |
9 |
Certificate of conformity |
GFM |
1 |
Copy |
10 |
Directions for use |
GFM |
1 |
Copy |
It is especially suitable for the filling, production and maintenance of dry powder extinguisher and also suitable for filling various powder products. So it is an ideal equipment in the powder filling industry.
hongyuan machinery origining from 1978
Send Inquiry to This Supplier
You May Also Like
-
Fire ExtinguisherNegotiableMOQ: 2500 Pieces
-
Fire Extinguisher Fire Hose Marine Grade Frp Cabinet Fiberglass CabinetUS$ 40 - 100MOQ: 20 Pieces
-
150-300CC Fire Fighting Motorcycle / MotorNegotiableMOQ: 10 Pieces
-
10m3 Cryogenic Liquid Nitrogen/oxygen/argon Storage Tank/contianer Price for Fire Protection With Low Price and High QualityUS$ 23,716 - 23,852MOQ: 1 Piece
-
Photoluminescent Fire Extinguisher Double Sided SignsUS$ 0.3 - 1MOQ: 100 Pieces
-
Rescue Lighting Safety Rope, Fire Fighting Equipment, Product, Emergency Light, Rescue Lamp,Safety Equipment,safety ProductUS$ 100 - 500MOQ: 1 Set
-
Wholesale Cheapest Fire Fighting Water GunUS$ 0.73 - 9.19MOQ: 5 Cartons
-
Bus Fire Extinguisher S-00001US$ 120 - 150MOQ: 1 Piece
-
Hot!stainless Steel Fire Extinguishing ShellUS$ 0.1 - 20MOQ: 1000 Pieces
-
Latest Fire Extinguisher SimulatorUS$ 2,200 - 5,000MOQ: 20 Sets
