Contact Platform Support
Help CenterPE,PP&Fiberglass Mesh Five Layer Construction Formwork
Related Products
-
High Quality PVC Pipe Extrusion Line Plastic MachineUS$ 17,650 - 47,050MOQ: 1 Set -
High Quality UPVC CPVC Pipe Extrusion Line Plastic MachineUS$ 17,650 - 47,050MOQ: 1 Set
-
High Quality UPVC CPVC Pipe Extrusion Line Plastic MachineUS$ 17,650 - 47,050MOQ: 1 Set
-
CPVC Pipe Production Line Plastic MachineUS$ 17,650 - 47,050MOQ: 1 Set
-
PVC Pipe Extrusion Line Plastic MachineryUS$ 17,650 - 47,050MOQ: 1 Set
Specifications
1)PE,PP&Fiberglass Mesh Five Layer Construction Formwork thickness:8-20mm2)High quality with competitive price
3)Long life
Welcome to visit our PE,PP &Fiberglass Mesh Five-Layer Building Formwork!
PE,PP &Fiberglass Mesh Five-Layer Building Formwork is made of PE PP, fly ash, calcium carbonate and other fillers.
It is 5 layers, as the picture, outside two green surfaces are PP or PE, using the recycling material, such as the recycled film, package, the reclaimed plastic pipe, barrel and other things!
In the middle it is made by the fly ash, calcium carbonate and the other fillers.
And there are two layer fiberglass net in it! It made the board have the high intensity, small distortion degree and small expansion coefficient.
The plastic building templates can replace steel templates and bamboo plastic sheet templates. Its advantages are as follows: low cost, light weight, it can continuous use 20 -50 times, Waste material can be re-used to do new building templates!
In the following it is some test result, you can see!
NO. |
Item |
Unit |
Result |
Standard |
01 |
Tensile strength portrait |
Mpa |
13.4 |
GB/T1040.2-2006/1B/10 |
02 |
Water absorption |
g/m² |
2.3 |
GB/T1034-1998 |
03 |
Shore hardness |
HD |
60 |
GB/T2411-1980 |
04 |
Vicat softening hardness A50 |
°C |
124 |
GB/T1633-2000 |
05 |
Simple support Impact strength portrait I type test sample |
KJ/m² |
9.3 |
GB/T1043-1993 |
06 |
Flexural strength portrait V=5mm/min |
Mpa |
20.5 |
GB/T9341-2000
|
07 |
Modulus of elasticity in static bending portrait V=2mm/min |
Mpa |
2080 |
GB/T9341-2000
|
08 |
Retraction ratio 135°C 2h length and breadth |
% |
0.18/0.22 |
|
The advantages of the five-layer formwork are as follows:
Compared with the traditional formwork, our five-layer formwork has the following advantages:
1. Good water resistance. Even if it completely immersed in water for several days, it will not damp deformation, rust will not rot.
2. Incompatible with the cement, not adhesion, mold release easily after construction, it will not cement the adhesion and deformation.
3. Construction of high efficiency and good quality. Construction of the building with its smooth surface, no secondary modification, saving process, improve construction efficiency.
4. Light weight, convenient construction.
5. Long life, re-use more often. Ultimately the damaged plastic formwork can be crushed again, re-processed into a new formwork, save resources, meet the "green industry" requirement.
6. Insulation is good, beneficial to shorten the construction period.
7. It has the acid and alkali proof, corrosion proof, weather-resistant, anti-aging, long service life. It can be sawing, planing, nailing, drilling, riveting as the wood, also can be painted and carved. By virtue of its superior performance, it can completely replace the wood and steel construction forwork. Can be widely used in indoor and outdoor construction formwork, mobile homes, board and train box compartment partitions, ships and so on.
.
Send Inquiry to This Supplier
You May Also Like
-
Rebar Springs Clamp Scaffold Beam ClampsUS$ 0.7 - 0.7MOQ: 30000 Pieces
-
China Manufacture Building Steel FrameworkUS$ 1,300 - 1,400MOQ: 22 Tons
-
Anchor Plate With Wing Nut for Tie Rod of BuildingUS$ 1 - 100MOQ: 100 Sets
-
Construction Steel Rapid ClampUS$ 1 - 3MOQ: 100 Pieces
-
Plastic Tie Rod ConeUS$ 3.82 - 52.3MOQ: 1 Ton
-
2014 New Design Plastic Mould Interlocking Molds Concrete Hollow Blocks Bricks MakingUS$ 5 - 10MOQ: 500 Pieces
-
Film Faced Plywood Use as Construction PlywoodUS$ 100 - 300MOQ: 50 Cubic Meters
-
China Manufacture Best Quality Poplar Eucalyptus Film Faced PlywoodUS$ 330 - 430MOQ: 10 Pieces
-
16" TJI Floor Wooden Joist for USA Market 90x45mm Flange I JoistNegotiableMOQ: 5000 Sheets
-
H20 Timber Beam H20 Timber Beam Formwork for Column and WallUS$ 6.50 - 6.60MOQ: 40
